Netgear GSM7252PS 7000 Series Managed Switch Administration Guide for Software - Page 14

ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3 c. Click the Unit 1. The Ports display. d. Click the gray box under port 1 and 2 until T displays. The T specifies that the egress packet is tagged for the port. e. Click Apply 2. Specify that only tagged frames will be accepted on port 1/0/1 and 1/0/2. a. From the main menu, select Switching > VLAN> Advanced > Port PVID Configuration. A screen similar to the following displays. Figure 1-5 b. Under PVID Configuration, scroll down to interface 1/0/1 and select the checkbox for 1/0/1. Then scroll down to the interface 1/0/2 and select the checkbox for 1/0/2. c. Enter the following information in the PVID Configuration. • Select VLAN Only in the Acceptable Frame Type polyhedron field. • Enter 2 in the PVID(1 to 4093) field. d. Click Apply to save the settings. Assign Ports to VLAN3 This example shows how to assign the ports that will belong to VLAN 3, and to specify that untagged frames will be accepted on port 1/0/4. Note that port 1/0/2 belongs to both VLANs and that port 1/0/1 can never belong to VLAN 3. Virtual LANs 1-5 v1.0, June 2010