Netgear GSM7252PS 7000 Series Managed Switch Administration Guide for Software - Page 226
Web Interface: Diffserv for VoIP, Attach the defined policy to an inbound service interface.
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3 Create a second DiffServ classifier named 'class_ef' and define a single match criterion to detect a DiffServ code point (DSCP) of 'EF' (expedited forwarding). This handles incoming traffic that was previously marked as expedited somewhere in the network. (Netgear Switch) (Config)#class-map match-all class_ef (Netgear Switch) (Config class-map)#match ip dscp ef (Netgear Switch) (Config class-map)#exit Create a DiffServ policy for inbound traffic named 'pol_voip', then add the previously created classes 'class_ef' and 'class_voip' as instances within this policy. This policy handles incoming packets already marked with a DSCP value of 'EF' (per 'class_ef' definition), or marks UDP packets per the 'class_voip' definition) with a DSCP value of 'EF'. In each case, the matching packets are assigned internally to use queue 5 of the egress port to which they are forwarded. (Netgear Switch) (Config)#policy-map pol_voip in (Netgear Switch) (Config policy-map)#class class_ef (Netgear Switch) (Config policy-class-map)#assign-queue 5 (Netgear Switch) (Config policy-class-map)#exit (Netgear Switch) (Config policy-map)#class class_voip (Netgear Switch) (Config policy-class-map)#mark ip-dscp ef (Netgear Switch) (Config policy-class-map)#assign-queue 5 (Netgear Switch) (Config policy-class-map)#exit (Netgear Switch) (Config policy-map)#exit Attach the defined policy to an inbound service interface. (Netgear Switch) (Config)#interface 1/0/2 (Netgear Switch) (Interface 1/0/2)#service-policy in pol_voip (Netgear Switch) (Interface 1/0/2)#exit (Netgear Switch) (Config)#exit Web Interface: Diffserv for VoIP To use the Web interface to configure diffserv for VoIP, proceed as follows: 1. Set the queue 5 on all the interfaces to use the strict mode a. From the main menu, select QoS > CoS > Advanced > CoS Interface Configuration. A screen similar to the following displays. Differentiated Services v1.0, June 2010 11-22