Netgear GSM7252PS 7000 Series Managed Switch Administration Guide for Software - Page 558

ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3 Table 31-1. RADIUS Attributes for Configuring Captive Portal Users (continued) RADIUS Attribute No. Description Range WISPr-MaxBandwidth-Up WISPr-MaxBandwidth-Down 14122, 7 Maximum client transmit rate (b/s). Limits the bandwidth at which the client can send data into the network. If the attribute is 0 or not present then use the value configured for the captive portal. Integer 14122, 8 Maximum client receive rate (b/s). Limits the bandwidth at which the client can receive data from the network. If the attribute is 0 or not present then use the value configured for the captive portal. Integer Usage Optional Default 0 Optional 0 CLI: Configuring RADIUS as the Verification Mode (Netgear Switch ) (Config-CP 1)#radius-auth-server Default-RADIUS-Server (Netgear Switch ) (Config-CP 1)#verification radius Web Interface: Configuring RADIUS as the Verification Mode 1. From the main menu, select Security > Control >Captive Portal> CP Configuration. A screen similar to the following displays. Figure 31-7 2. Under Captive Portal Configuration, scroll down to CP ID 1 and select the CP 1 checkbox. Now CP 1 appears in the CP ID field at the top. 3. Enter the following information in the Captive Portal Configuration. • Select RADIUS from the Verification field. • In the Radius Auth Server field, enter the radius server name Default-RADIUS-Server. 4. Click Apply. Captive Portal v1.0, June 2010 31-9