Netgear GSM7252PS 7000 Series Managed Switch Administration Guide for Software - Page 331

ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3 APPLY button, the switch will send three traceroute packets each hop, and the results will be displayed in the result table. b. Enter the following information in the Traceroute. In the IP Address field, enter 216.109.118.74. c. Click Apply. Configuration Scripting In this chapter, the following examples are provided: • "script" on page 15-4 • "script list and script delete" on page 15-4 • "script apply running-config.scr" on page 15-4 • "Create a Configuration Script" on page 15-5 • "Upload a Configuration Script" on page 15-5 Configuration Scripting: • Allows you to generate text-formatted files • Provides scripts that can be uploaded and downloaded to the system • Provides flexibility to create command configuration scripts • May be applied to several switches • Can save up to ten scripts or 500K of memory • Provides List, Delete, Apply, Upload, Download • Provides script format of one CLI command per line Some considerations are: • Total number of scripts stored on box limited by NVRAM/FLASH size. • Application of scripts is partial if script fails. For example, if the script executes five of ten commands and the script fails, the script stops at five. • Scripts cannot be modified or deleted while being applied. • Validation of scripts checks for syntax errors only. It does not validate that the script will run. 15-3 v1.0, June 2010 Tools