Netgear GSM7252PS 7000 Series Managed Switch Administration Guide for Software - Page 330

ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3 Tracing route over a maximum of 20 hops 1 10.254.24.1 2 10.254.253.1 3 63.237.23.33 4 63.144.4.1 5 63.144.1.141 6 205.171.21.89 7 205.171.8.154 8 205.171.8.222 9 205.171.251.34 10 209.244.219.181 11 209.244.11.9 12 4.68.121.146 13 4.79.228.2 14 216.115.96.185 15 216.109.120.203 16 216.109.118.74 40 ms 30 ms 29 ms 39 ms 70 ms 39 ms 70 ms 70 ms 60 ms 60 ms 60 ms 50 ms 60 ms 110 ms 70 ms 78 ms 9 ms 49 ms 10 ms 63 ms 50 ms 70 ms 50 ms 50 ms 90 ms 70 ms 60 ms 70 ms 60 ms 59 ms 66 ms 121 ms 10 ms 21 ms 10 ms 67 ms 50 ms 50 ms 70 ms 80 ms 50 ms 70 ms 50 ms 60 ms 60 ms 70 ms 95 ms 69 ms Web Interface: Traceroute To use the Web interface to configure the managed switch, proceed as follows: 1. Configure the Traceroute. a. From the main menu, select Maintenance > Troubleshooting > Traceroute. A screen similar to the following displays. Figure 15-1 Use this screen to tell the switch to discover the routes that packets actually take when traveling to their destination through the network on a hop-by-hop basis. Once you click the Tools v1.0, June 2010 15-2