Netgear GSM7252PS 7000 Series Managed Switch Administration Guide for Software - Page 145

ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3 b. Under IP Configuration, make the following selections: • Next to Routing Mode, select the Enable radio button. • Next to IP Forwarding Mode, select the Enable radio button. c. Click Apply to enable IP Routing. 5. Add a static route with IP address 192.268.40.0/24: a. From the main menu, select Routing > Routing Table > Basic > Route Configuration. A screen similar to the following displays. Figure 9-12 b. Under Configure Routes, make the following selection and enter the following information: • Select Static in the Route Type field. • In the Network Address field, enter 192.168.40.0. • In the Subnet Mask field, enter 255.255.255.0. • In the Next Hop IP Address field, enter 192.168.200.2. c. Click Add. 6. Create a static route with IP address 192.168.50.0/24: a. From the main menu, select Routing > Routing Table > Basic > Route Configuration. A screen similar to the following displays. 9-15 v1.0, June 2010 Access Control Lists (ACLs)