Netgear GSM7252PS 7000 Series Managed Switch Administration Guide for Software - Page 297

ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3 c. Select Static in the VLAN Type field. d. Click Add. 3. Setting force authorized mode on the port 1/0/6 and 1/0/12. a. From the main menu, select Security > Port Authentication > Advanced>Port Authentication. A screen similar to the following displays. Figure 13-33 b. Under Port Authentication, scroll down to interface 1/0/6 and 1/0/12, select the checkbox for that interface. c. Under Port Authentication, select Force Authorized in the Control Mode field. d. Click Apply to save settings. 4. Enable dot1x on the switch. Make sure 1/0/12 and 1/0/6 is configured as force authorized before you do this step, otherwise you cannot access the switch through GUI. a. From the main menu, select Security > Port Authentication > Basic>802.1x Configuration. A screen similar to the following displays. 13-32 v1.0, June 2010 Security Management