Netgear GSM7252PS 7000 Series Managed Switch Administration Guide for Software - Page 536
Web Interface: Configuring DVMRP
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 536 highlights
ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3 Enable IGMP mode on the interface 1/0/24. (Netgear Switch) (Config)#interface 1/0/24 (Netgear Switch) (Interface 1/0/24)#ip igmp (Netgear Switch) (Interface 1/0/24)#exit (Netgear Switch) #show ip dvmrp neighbor Interface 1/0/11 Neighbor IP Address 192.168.3.2 State Active Up Time (hh:mm:ss 00:01:03 Expiry Time (hh:mm:ss 00:00:24 Generation ID 88099 Major Version 3 Minor Version 255 Capabilities Prune GenID Missing 11441 Received Routes 0 Received Bad Packets 0 Received Bad Routes 0 Interface 1/0/3 Neighbor IP Address 192.168.4.1 State Active Up Time (hh:mm:ss 00:01:17 Expiry Time (hh:mm:ss 00:00:23 Generation ID 1116347728 Major Version 3 Minor Version 255 More Entries or quit(q) Capabilities Prune GenID Missing 11441 Received Routes 0 Received Bad Packets 0 Received Bad Routes 0 (Netgear Switch) #show ip mcast mroute detail summary Source IP 192.168.1.2 Multicast Route Table Summary Incoming Group IP Protocol Interface 225.0.0.1 DVMRP 1/0/11 Outgoing Interface List 1/0/24 Web Interface: Configuring DVMRP On Switch A: To use the Web interface to config DVMRP, proceed as follows: DVMRP v1.0, June 2010 30-7