Netgear GSM7252PS 7000 Series Managed Switch Administration Guide for Software - Page 386

ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3 1. From the main menu, select System > Management > DNS > DNS Configuration. A screen similar to the following displays. Figure 19-1 2. Under DNS Server Configuration, in the DNS Server field, enter 12.7.210.170. 3. Click Add. 4. Under DNS Server Configuration, in the DNS Server field, enter 219.141.140.10. 5. Click Add. Both DNS servers now show in the DNS Server Configuration table. Manually Add a Host Name and an IP Address The following example shows commands to add a static host name entry to the switch so that you can use this entry to resolve the IP address. The example is shown as CLI commands and as a Web interface procedure. CLI Example: Manually Adding a Host Name and an IP Address To use the CLI to manually add a host name and an IP address, enter the following CLI commands: (Netgear Switch)#config (Netgear Switch) (Config)#ip host www.netgear.com 206.82.202.46 (Netgear Switch) (Config)#ip domain-lookup (Netgear Switch) (Config)#ping www.netgear.com Send count=3, Receive count=3 from 206.82.202.46 DNS v1.0, June 2010 19-2