Netgear WNAP210 WNAP210 Reference Manual - Page 49
Configuring the RADIUS Server Settings, admin, password, Configuration, Security > Advanced >
UPC - 606449062694
View all Netgear WNAP210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
ProSafe Wireless-N Access Point WNAP210 Reference Manual Use the procedures described in the following sections to configure the WNAP210. Store this information in a safe place. Configuring the RADIUS Server Settings You can set p or modify the RADIUS server settings to compliment network authentication security options. The RADIUS server must be used with Legacy 802.1x, and can be used with WPA and WPA2 network authentication. When using a RADIUS server, the RADIUS server settings before completing the network authentication security profile (see "Configuring WPA with RADIUS" on page 2-33, "Configuring WPA2 with RADIUS" on page 2-35, or "Configuring WPA and WPA2 with RADIUS" on page 2-36 for specifics on implementing these security options). Note: The RADIUS server settings apply to all profiles. They o need to be configured only once per wireless access point. To set up or modify the RADIUS server settings: 1. From your Web browser, log in to the WNAP210 using the default LAN address of http://192.168.0.236, user name admin, and password password, or use the LAN address and password that you set up. 2. Select Configuration > Security > Advanced > RADIUS Server Settings. The RADIUS Server Settings screen displays, as shown in Figure 2-13. Installation and Configuration v1.0 March 2009 2-27