Netgear WNAP210 WNAP210 Reference Manual - Page 58
Configuring WPA and WPA2 with RADIUS
UPC - 606449062694
View all Netgear WNAP210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
ProSafe Wireless-N Access Point WNAP210 Reference Manual Configuring WPA and WPA2 with RADIUS Not all wireless adapters support WPA and WPA2. Client software is required on the client: • Windows XP and Windows 2000 with Service Pack 3, or later, do include the client software that supports WPA. The wireless adapter hardware and driver must also support WPA. • Service Pack 3 does not include the client software that supports WPA2. Make sure that your client card supports WPA2. The wireless adapter hardware and driver must also support WPA2. Consult the product documentation for your wireless adapter, WPA client software for instructions on configuring WPA settings, and WPA2 client software for instructions on configuring WPA2 settings. Figure 2-19 To configure WPA and WPA2 with RADIUS: 1. Select Configuration > Security > Advanced >RADIUS Server Settings. The RADIUS Server Settings screen displays. 2. Enter the RADIUS settings as shown in "Configuring the RADIUS Server Settings" on page 2-27. 3. Click Apply to save your RADIUS settings. 4. Select Security Profile Settings. The screen for the profile settings you selected displays. When the Security Profile screen displays, select the security profile you want to modify and click Edit. 2-36 v1.0 March 2009 Installation and Configuration