Netgear WNAP210 WNAP210 Reference Manual - Page 54
Configuring WEP, Enter the number of hexadecimal digits appropriate to the encryption strength
UPC - 606449062694
View all Netgear WNAP210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
ProSafe Wireless-N Access Point WNAP210 Reference Manual Configuring WEP To configure WEP data encryption: 1. From the Network Authentication drop-down list, select either Open System or Shared Key. 2. From the Data Encryption drop-down list, select encryption strength (64 bits, 128 bits, or 152 bits). 3. You manually or automatically program the four data encryption keys. These values must be identical on all PCs and wireless access points in your network. Choose either: • Automatic. Enter a word or group of printable characters in the Passphrase box and click the Generate button. The four key boxes will be automatically populated with key values. • Manual. Enter the number of hexadecimal digits appropriate to the encryption strength: 10 characters for 64-bit, 26 digits for 128-bit, or 32 characters for 152-bit WEP encryption (any combination of 0-9, a-f, or A-F). Select which of the four keys will be the default. Figure 2-16 4. Select the key to be used as the default key by selecting the radio button. (Data transmissions are always encrypted using the default key.) 2-32 v1.0 March 2009 Installation and Configuration