Netgear WNR834Bv2 WNR834Bv2 Reference Manual - Page 118
Restoring the Default Configuration and Password, password - restore factory settings
View all Netgear WNR834Bv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual 8. In the main menu of the WNR834B router, under the heading Advanced, click Wireless Settings. Figure 7-2 9. Make sure the checkboxes are selected for Enable Wireless Router Radio and Enable SSID Broadcast. 10. Click Setup Access List. 11. Make sure that the checkbox is not selected for Turn Access Control On. 12. Configure and test your wireless computer for wireless connectivity. Program the wireless adapter of your computer to have the same SSID and channel that you configured in the router, and disable encryption. Check that your computer has a wireless link and is able to obtain an IP address by DHCP from the router. Once your computer has basic wireless connectivity to the router, you can configure the advanced wireless security functions of the computer and router. Restoring the Default Configuration and Password This section explains how to restore the factory default configuration settings, changing the router's administration password back to password. You can erase the current configuration and restore factory defaults in two ways: • Use the Erase function of the router (see "Erasing the Configuration" on page 6-7). 7-12 v2.1, July 2007 Troubleshooting