Netgear WNR834Bv2 WNR834Bv2 Reference Manual - Page 28
Setting up a Vista WPS Network, Allow a Registrar to Con This Router, Enable Built-In Registrar
View all Netgear WNR834Bv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual . Note: The Fragmentation Threshold, CTS/RTS Threshold and Preamble Mode options are reserved for wireless testing and advanced configuration only. Do not change these settings. Setting up a Vista WPS Network If you have configured your router from a Windows Vista PC using Wi-Fi Protected Setup (WPS) or if you configured your router using the NETGEAR wizard and selected no security, WPA, WPA2 or WPA+WPA2 as your security, you can expand your network map and add additional clients by using the following features in the Vista Settings menu. • Allow a Registrar to Configure This Router. A Windows Vista PC can configure the router using WPS. This is the default configuration until the router has been configured (see Figure 1-10 on page 1-15). Once a Windows Vista PC has configured the router, this feature becomes inactive. To reconfigure the router using a Windows Vista PC, this option must be enabled • Enable Built-In Registrar. The router becomes the registrar and can easily add additional wireless clients into your network by automatically assigning the router's Wireless Network Name (SSID) and WPA/WPA2-PSK security to the client. The client is added by entering the client PIN (which is promoted from the client utility) in the Add a Wireless Client dialog field.. Note: When using the Vista Settings, all devices in your network must use the same security settings and Wireless Network Name (SSID) in order to interoperate with each other. To configure the router from a Windows Vista PC: 1. If there is no check mark in the Allow a Registrar to Configure this Router checkbox, check the radio box and click Apply. 2. On the Windows Vista PC, click the Network icon on your desktop to view a dialog that displays your network devices. 3. From the Network dialog box, click the Add a wireless device menu button and follow the instructions displayed by the Windows Vista registrar. Once a Windows Vista PC has configured the router, the Allow a Registrar to Configure this Router feature becomes inactive. 1-14 v2.1, July 2007 Configuring Basic Connectivity