Nikon P80 P80 User's Manual - Page 150
Error Messages
View all Nikon P80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Error Messages The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them. Display O (blinks) Problem Clock not set. Solution Set clock. B Battery running low. N Battery exhausted. P Battery temperature high Battery exhausted. Battery temperature is high. P Please wait for the camera to finish recording. O Camera cannot perform other operations until recording is complete. Prepare to charge or change battery. Charge or change battery. Turn off camera, and allow battery to cool down before resuming use. After five seconds, this message will disappear, the monitor will turn off, and the power-on lamp will blink rapidly. After the lamp blinks for three minutes, the camera will turn off automatically, but you can also press the power switch to turn it off manually. Wait until message clears from display automatically when recording is complete. N Write-protect switch is in Memory card is write "lock" position. protected. Slide write-protect switch to "write" position. P Error accessing memory This card cannot be used. card. P This card cannot be read. P Card is not formatted. Format card? No Yes Memory card has not been formatted for use in camera. • Use approved card. • Check that connectors are clean. • Confirm that memory card is correctly inserted. Choose Yes and press k to format card, or turn camera off and replace card. A 117 14, 16 14, 16 17 27 21 131 20 20 21 Technical Notes 136