Nokia 002J900 User Manual - Page 73
WLAN internet access points, Security settings for WEP, Security settings for 802.1x and WPA/WPA2
View all Nokia 002J900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
● Proxy server address - Enter the address of the proxy server. ● Proxy port number - Enter the port number of the proxy server. WLAN internet access points Select Menu > Settings and Connectivity > Destinations > Access point, and follow the instructions on the screen. To edit a wireless LAN (WLAN) access point, open one of the access point groups and select an access point marked with . Follow the instructions from your WLAN service provider. ● WLAN network name - Select Enter manually or Search for networks. If you select an existing network, WLAN network mode and WLAN security mode are determined by the settings of its access point device. ● Network status - Define whether the network name is displayed. ● WLAN network mode - Select Ad-hoc to create an ad hoc network and to allow devices to send and receive data directly; a WLAN access point device is not needed. In an ad hoc network, all devices must use the same WLAN network name. ● WLAN security mode - Select the encryption used: WEP, 802.1x (not for ad hoc networks), or WPA/WPA2. If you select Open network, no encryption is used. The WEP, 802.1x, and WPA functions can be used only if the network supports them. ● Homepage - Enter the web address of the starting page. Connectivity ● Use access point - Select After confirmation if you want the device to ask for confirmation before the connection using this access point is created or Automatically if you want the device to connect to the destination using this access point automatically. To enter the settings for the selected security mode, select WLAN security settings. Security settings for WEP ● WEP key in use - Select the wired equivalent privacy (WEP) key number. You can create up to four WEP keys. The same settings must be entered on the WLAN access point device. ● Authentication type - Select Open or Shared for the authentication type between your device and the WLAN access point device. ● WEP key settings - Enter WEP encryption (length of the key), WEP key format (ASCII or Hexadecimal), and WEP key (the WEP key data in the selected format). Security settings for 802.1x and WPA/WPA2 ● WPA/WPA2 - Select the means of authentication: EAP to use an extensible authentication protocol (EAP) plug-in, or Pre-shared key to use a password. Complete the appropriate settings: ● EAP plug-in settings - Enter the settings according to the instructions from your service provider. ● Pre-shared key - Enter a password. The same password must be entered on the WLAN access point device. © 2009 Nokia. All rights reserved. 73