Nokia N93i User Guide - Page 114
Call, Reject call with SMS
View all Nokia N93i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Settings Call Send my caller ID - Select Yes or No to set your phone number to be seen by or hidden from the person to whom you are calling. Otherwise, the value may be set by your service provider when you make subscribe to the network service. Set by network is displayed. Call waiting - If you have activated call waiting (network service), the network notifies you of a new incoming call while you have a call in progress. To check whether the function is active, select Check status. To set the function on or off, select Activate or Cancel. Reject call with SMS - Select Yes to send a text message to a caller informing why you could not answer the call. See "Answer or reject a call", on page 54. Message text - Write text to be sent in a text message when you reject a call. Image in video call - Select a still image to be displayed instead of video. Automatic redial - Select On, and your device makes a maximum of 10 attempts to connect the call after an unsuccessful call attempt. To stop automatic redialing, press . Summary after call - Activate this setting if you want the device to briefly display the approximate duration of the last call. Speed dialling - Select On, and the numbers assigned to the speed dialing keys ( - ) can be dialed by pressing and holding the key. See also "Speed dial a phone number", on page 49. Anykey answer - Select On. To answer an incoming call, briefly press any keypad key, except , , , and . Line in use - This setting (network service) is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. If you select Line 2 and have not subscribed to this network service, you will not be able to make calls. When line 2 is selected, is shown in the standby mode. Tip! To switch between the phone lines, press and hold in the standby mode. Line change - To prevent line selection (network service), select Disable if supported by your SIM card. To change this setting, you need the PIN2 code. 104 Copyright © 2007 Nokia. All rights reserved.