Oki C830dn User Guide

Oki C830dn Manual

Get Oki C830dn PDF manuals and user guides View all Oki C830dn manuals
Add to My Manuals
Save this manual to your list of manuals

Oki C830dn manual content summary:

  • Oki C830dn | User Guide - Page 1
  • Oki C830dn | User Guide - Page 2
    Information Copyright © 2008 by Oki Data. All Rights Reserved Document Information C810/C830 User's Guide P/N 59311001, Revision 1.0 September drivers and manuals are available from: http://www.okiprintingsolutions.com Trademark Information Oki and Oki Data are registered trademarks of Oki
  • Oki C830dn | User Guide - Page 3
    EMERGENCY FIRST AID Take care with toner powder: If swallowed, give small amounts of cold water and seek medical attention. water and soap to help reduce risk of staining skin or clothing. MANUFACTURER Oki Data Corporation, 4-11-22 Shibaura, Minato-ku, Tokyo 108-8551, Japan Emergency first aid > 3
  • Oki C830dn | User Guide - Page 4
    Printer overview 8 Front view 8 Rear view 9 Changing the display language 9 Paper unit 11 Loading paper 12 Cassette trays 12 Multi purpose tray 15 Security (C830 only 16 Secure Shutdown Menu 23 Print menu 23 Media menu 24 color menu 26 System configuration menu 26 Network menu
  • Oki C830dn | User Guide - Page 5
    details 65 Toner cartridge replacement 65 Image drum replacement 68 Transfer belt replacement 71 Fuser replacement 73 Cleaning the LED head 74 Installing upgrades 75 Duplex unit 76 Memory upgrade (C830 77 Hard disk drive (C830 80 Additional paper tray(s 82 Adjusting printer drivers 83
  • Oki C830dn | User Guide - Page 6
    , and in order to ensure that you benefit from its full functionality, this model has been designed to operate only with genuine original toner cartridges. Any other toner cartridge may not operate at all, even if it is described as "compatible", and if it does work, your product's performance and
  • Oki C830dn | User Guide - Page 7
    Digital LED technology for high speed processing of your printed pages; > Profile Assistant utility allows you to download ICC profiles to the hard disc (Hard Disc Drive required) (C830); > PostScript 3, PCL 5C, PCL 6 and Epson FX emulations for industry standard operation and wide compatibility
  • Oki C830dn | User Guide - Page 8
    tray. Used for feeding heavier paper stocks, envelopes and other special media. Also for manual feeding of single sheets when required. 5. Front cover release lever. 6. Multi-purpose tray release lever 7. Top cover release button. 8. LED heads 9. Fuser 10.Toner cartridges (C,M,Y,K). 11.ID units
  • Oki C830dn | User Guide - Page 9
    Network Interface may have a protective "plug" which must be removed before connection can be made. When the rear paper stacker is folded down paper exits the printer through the rear of the printer and is stacked here face up. This is mainly used for heavy print media. When used in conjunction with
  • Oki C830dn | User Guide - Page 10
    performance will be obtained when using standard 20 to 24 lb (75~90g/m²) paper designed for use in copiers and laser printers. Suitable types are: > HammerMill® Laser Print Radiant, White, 24 lb US Bond > Xerox® 4024, 20 lb US Bond > Oki® Bright White, 32 lb US Bond Use of heavily embossed or very
  • Oki C830dn | User Guide - Page 11
    because parts of tray 1 are used to guide paper fed from tray 2. This also applies to tray 2 when paper is being fed from tray 3. MULTI PURPOSE TRAY printer should be opened and the tray extension pulled out when required for use. In this condition paper will exit via this path, regardless of driver
  • Oki C830dn | User Guide - Page 12
    on a flat surface to make it flush again (3). 2 1 3 3. Load paper long edge feed (LEF) (letter headed paper - face down and top edge towards the right of the printer) (1) up to mark (a). 1 a 2 3 4. Adjust the rear stopper, paper guides (2) and cassette tray roller (3) to the size and orientation
  • Oki C830dn | User Guide - Page 13
    Edge Feed (LEF) checkbox must be enabled in the printer driver. If the paper is oriented short-edge, the Long Edge Feed checkbox must be disabled in the printer driver. If the driver setting doesn't match the paper orientation, the printer will display an error message indicating that a mismatch has
  • Oki C830dn | User Guide - Page 14
    Do not leave space between the paper and the guides and rear stopper. > Do not overfill the paper tray. Capacity depends on the type of paper stock. > Do not load damaged paper. > Do not load paper of different sizes or types at the same time. > Do not pull the paper tray out during printing (except
  • Oki C830dn | User Guide - Page 15
    paper supports (2). 1 4 3 2 4 3. Press gently down on the paper platform (3) to ensure it is latched down. 4. Load the paper and adjust the paper guides (4) to the size of paper short edge into the printer. Do not select duplex printing on envelopes. > Do not exceed the paper capacity of about 100
  • Oki C830dn | User Guide - Page 16
    PIN. This feature requires the hard disk drive option to be fitted to your machine and enabled in the printer driver. If there is not enough hard disk space for the spooled data, a "Disk Full" message displays, and only one copy prints. The secure printing feature may not be available from within
  • Oki C830dn | User Guide - Page 17
    the Printer Control Panel on the front of the machine. SHUT DOWN RREADY /RESTART ATTENTION HELP Ready To Print Power Save CM Toner YK arrow buttons to enter the first digit of your PIN, then press [ENTER]. 4. Repeat step 3 to enter the remaining three digits. 5. Press [ENTER] to confirm C830) > 17
  • Oki C830dn | User Guide - Page 18
    option is available for the C830 model. This feature allows and is available only in the Windows PostScript and PCL drivers. The difference with job spooling is that the in the driver screens, or if it is greyed out, check to ensure that the hard disk is enabled in the printer driver. Like the
  • Oki C830dn | User Guide - Page 19
    disk drive in your machine, this device must be enabled in the printer driver. The encrypted secure printing feature may not be available from within some DOCUMENT 1. If using the PCL driver, in the [Setup] tab choose any saved driver settings you wish to use. 1. In the driver's [Job Options] tab,
  • Oki C830dn | User Guide - Page 20
    > Multiple Random Overwrites: erases a print job after over writing it with data three times. This is the safest method of erasing a print job however OK] to accept your changes. 7. Click [OK] to close the Printer Properties window. 8. Print your document. PRINTING THE DOCUMENT Follow the C830) > 20
  • Oki C830dn | User Guide - Page 21
    the data when pressed for two seconds or longer with WRONG PAPER SIZE, RUN OUT OF PAPER, TRAY 1 IS OPEN, or TRAY 1 IS NOT FOUND is displayed. HOW TO CHANGE THE SETTINGS - USER It should be noted that many of these settings can be, and often are, overridden by settings in the Windows printer drivers
  • Oki C830dn | User Guide - Page 22
    : When you have changed any settings in the USB MENU, turn the printer OFF, then ON again. HOW TO CHANGE THE SETTINGS - ADMINISTRATOR You line of the password and then press the Enter button. Enter your 4- to 9-digit password. (The default password is "aaaaaa"). 5. Press the Enter button. 6. Press
  • Oki C830dn | User Guide - Page 23
    . Prints demonstration page containing graphics and text in color and monochrome. Prints a report of total impressions is not enabled, the printer will stop and request the correct size of paper to be loaded. Determines whether the printer check the size of paper loaded matches that required for
  • Oki C830dn | User Guide - Page 24
    is most appropriate when the majority of print jobs are in color. The printer runs at 26 ppm for color pages and 30 ppm for mono pages. MEDIA MENU This the printer for the weight of paper stock loaded in this tray. Selects the size of paper loaded in Tray 2 (lower) if installed. For CUSTOM setting
  • Oki C830dn | User Guide - Page 25
    in this tray (if installed). (see notes above for tray 1). Adjusts the printer for the weight of paper stock loaded in this tray (if installed). Selects the size of paper to be fed from the multi purpose tray. For CUSTOM setting see X-DIMENSION and Y-DIMENSION later in this table. Selects the type
  • Oki C830dn | User Guide - Page 26
    received data pauses before forcing a page eject. In PostScript Emulation mode the job will be cancelled if timeout occurs. Specifies whether the printer should continue printing even after a low toner condition is detected. Specifies whether the printer should perform jam recovery after a paper jam
  • Oki C830dn | User Guide - Page 27
    printer's USB data interface. ITEM SOFT RESET SPEED SERIAL NUMBER SETTINGS EXPLANATION ENABLE / DISABLE 12 / 480 Mps ENABLE / DISABLE Enables or disables the SOFT RESET Specifies whether IP address allocation is automatic (DHCP) or manually assigned. Current assigned IP address. To change, press
  • Oki C830dn | User Guide - Page 28
    MAINTENANCE MENU This menu provides access to various printer maintenance functions. ITEM MENU RESET SAVE MENU POWER SAVE PAPER BLACK SET PAPER COLOR SET TRNSPR BLACK SET TRNSPR COLOR SET SMR SETTING BG SETTING SETTINGS EXPLANATION EXECUTE Resets menus to default settings. EXECUTE Saves the
  • Oki C830dn | User Guide - Page 29
    MENU SHUTDOWN NENU xxxxxxxxxxxx FULL COLOR MONOCHROME CUSTOM COLOR C DRUM CHECK M DRUM CHECK Y DRUM CHECK Enter a password to gain entry to the Admin menu. Password should be from 6 to 12 digits of alpha/ numeric characters (or mix) The default value is "aaaaaa" The printer will restart after the
  • Oki C830dn | User Guide - Page 30
    this menu will not appear. Enables/disables the color menu. If DISABLE is selected, this menu will the LED control when NearLife warning of a toner, drum, fuser, or belt occurs. Attention LED is selected, the printer will go back to the source menu. If YES is selected, the printer will be
  • Oki C830dn | User Guide - Page 31
    From 4 to 12 alpha/numerical digits can be entered. Verifies the new to gain access to this menu, follow the instructions in "How to change the settings - Reset Main Counter Execute Reset supported. Enables/Disables the printing of the Usage Report. When changing a setting value, the printer
  • Oki C830dn | User Guide - Page 32
    ITEM New Password Verify Password SETTINGS xxxx xxxx EXPLANATION Sets a new password to enter Print Statistics menu. Re-enter new password set to enter Print Statistics set in New Password for confirmation. Menu functions - C810 > 32
  • Oki C830dn | User Guide - Page 33
    - C830 This section lists the menus accessed via the controls on the printer's operator panel and displayed in the LCD window. OPERATOR PANEL: 1 2 9 10 SHUT DOWN RREADY /RESTART ATTENTION HELP Ready To Print Power Save CM Toner YK BACK MENU ENTER ON LINE CANCEL 1. READY LED 3. Menu
  • Oki C830dn | User Guide - Page 34
    printer drivers. However, several of the driver settings can be left at "Printer Setting", which will then default to the settings entered in these printer password, and then press the Enter button. Enter your 4 to 9 digit password. (The default password is aaaaaa). 5. Press the Enter button C830 > 34
  • Oki C830dn | User Guide - Page 35
    Drum Magenta Drum Yellow Drum Black Drum Belt Fuser Cyan Toner Magenta Toner Yellow Toner Black Toner Printer Name Short Printer of a consumable remaining. Displays the full printer name. Displays an abbreviated version. Displays the Mac Address of the printer. Displays the Network firmware revision.
  • Oki C830dn | User Guide - Page 36
    printer. ITEM Configuration Network Demo Page Demo 1 File List ACTION Execute Execute Execute Execute PS font List PCL font List IBM PPR Font List Execute Execute Execute EPSON FX Font List Execute Usage Report Error Log Color print out a PCL font list. Scroll a list of color and mono pages
  • Oki C830dn | User Guide - Page 37
    increases in proportion to the number of jobs stored in HDD, and the printer may take up to 20 sec.) The search can be cancelled by holding in HDD are deleted by a delete method specified by the driver after printing or a delete instruction from the menu. Used to print out a stored job - C830 > 37
  • Oki C830dn | User Guide - Page 38
    fitted) Default: Paper size: Media Type: Media Weight: Cassette/Custom Plain/Letterhead/ Bond Paper Size/Media Type/Media Weight. Defines default condition (indicated by *) Select by scroll and Enter button. *User type 1 to 5 are displayed only if registered in the host PC. Menu functions - C830
  • Oki C830dn | User Guide - Page 39
    Paper size: Media Type: Media Weight: Tray usage: A3/A4 SEF/A4 LEF A5/A6/B4/B5 SEF/ B5 LEF/Legal14/ Legal 13.5/ Legal13/Tabloid/ Letter SEF/Letter LEF/Executive Custom the host PC. Paper weight 189 ~ 220g/m2 Sets MPTray usage. When Mismatching: if paper mismatch occurs, paper is requested from the
  • Oki C830dn | User Guide - Page 40
    Manual Timeout Default: 60 Wait Timeout Default: 40 Low Toner Default: Continue Jam Rcovery Default: On Error Report Default: Off Print Position Adjust Default: Paper Black Settings Default: Paper color /frequency. Change the setting when background is dark. Menu functions - C830 > 40
  • Oki C830dn | User Guide - Page 41
    drum in idle prior to printing in order to reduce horizontal white lines. Be warned that this will shorten the ID life by as much as this rotation (default condition indicated by *). Select by scroll and Enter button. Hex Dump Execute Prints out data printer off, to ensure that no hard disk data
  • Oki C830dn | User Guide - Page 42
    Disable Enable Disable Auto 802.2 802.3 Ethernet II SNAP Auto Manual xxx.xxx.xxx.xxx Subnet Mask xxx.xxx.xxx.xxx Gateway gain entry to the Admin Setup menu. Password should be from 6 to 12 digits of alpha/numeric characters (or mix) The default value is "aaaaaa" Sets Menu functions - C830 > 42
  • Oki C830dn | User Guide - Page 43
    it is connected to a HUB that has a spanning tree feature. However, printer start up time gets longer when computers are connected with two or three small LANs . Toner Save Mode On/Off This function works effectively only if the data input is color RGB data. This setting is valid in PS and PCL,
  • Oki C830dn | User Guide - Page 44
    - only for PCL). X Dimension 64 mm ~ 210 mm ~ 297 mm Specifies paper width of Custom paper as a default value. Sets a paper size at right angles to the paper run direction. Y Dimension 105 mm ~ 297 mm ~ 1321 mm Specifies paper length of Custom paper as a default value. Sets a paper size in the
  • Oki C830dn | User Guide - Page 45
    of PCL default font. Sets the PCL Width of the PCL default font in PCL (see machine operator panel for complete list). Sets the number of characters for A4 paper data to print (blank page) upon reception of FF command (OCH) in PCL Mode. OFF: Ejecting. Sets action when CR code is received in PCL
  • Oki C830dn | User Guide - Page 46
    data. OFF: Mode using Composite Black ON: Mode using Pure Black (PCL only) When minimum width is specified in PCL the paper feed destination command (ESC&l#H) in paper feed destination command (ESC&l#H) in PCL5e emulation. (Displayed only if Tray 3 is installed). Sets the # to specify the MP tray for the paper
  • Oki C830dn | User Guide - Page 47
    that can fit print data, equivalent to 11 inches (66 lines), in the LETTER-size printable area. Text Height Same/Diff Sets height of a character. SAME: Regardless of CPI, same height DIFF: According to CPI, character heights vary. Continuous Paper Mode On/Off Sets printer for using continous
  • Oki C830dn | User Guide - Page 48
    that can fit print data, equivalent to 11 inches (66 lines), in the LETTER-size printable area. Text Height Same/Diff Sets height of a character. SAME: Regardless of CPI, same height DIFF: According to CPI, character heights vary. Continuous Paper Mode On/Off Sets printer for using continous
  • Oki C830dn | User Guide - Page 49
    colors in the printer. This function is available only with PS language jobs. Selects limitation to the toner layer thickness. If paper enable 100% output in any individual color. The actual print, including the color reduction in PS. Setting to "OFF" will simplify the conversion process of CMYK data
  • Oki C830dn | User Guide - Page 50
    executed at the next power cycle. If Yes is selected, shutdown takes place, and the HDD is initialized at power Off/On cycle. Menu functions - C830 > 50
  • Oki C830dn | User Guide - Page 51
    , so the message is displayed as "PCL/Common/Common". Sets the LCD display control whennear life warning of a drum, fuser or trancfer belt occurs. ATTENTION LED is lit if ENABLED Controls the settings of the Attention LED when near end of life warning of toner, drum, fuser, or belt occurs. Attention
  • Oki C830dn | User Guide - Page 52
    enter Admin Setup. From 6 to 12 alpha/numeric digits can be entered. Resets EEPROM of CU. Resets User menu to the factory default. If Execute is this menu is selected, the printer performs AutoAdjust Registration. This adjustment must be executed when the printer is idling. Prints the C830 > 52
  • Oki C830dn | User Guide - Page 53
    should be from 6 to 12 digits of alpha/numeric characters (or mix) The default value is "aaaaaa" The printer will restart after the Boot Menu. service call occurs. USB Setup This menu controls the operation of the printer's USB data interface. ITEM SETTINGS EXPLANATION USB Speed Soft Reset
  • Oki C830dn | User Guide - Page 54
    done, all data stored on the hard disk cannot be restored. After execution, the following confirmation messages will appear. Are You Sure? Yes No If No is selected, the display will return to the previous menu. If Yes is selected, the printer will be automatically rebooted and the resetting of the
  • Oki C830dn | User Guide - Page 55
    ITEM Erase HDD SETTINGS Execute Enable initialization No Yes EXPLANATION Deletion of all data stored in the hard disk. DoD 5220.22-M sanitizing formula is used for will discontinue. Prevents a setting change accompanying initialization of Block Device (HDD,FLASH). Menu functions - C830 > 55
  • Oki C830dn | User Guide - Page 56
    to System Administrators. In order to gain access to this menu, follow the instructions in "How to change the settings - Administrator" on page 34, but hold function is not supported. Enables/Disables the printing of the Usage Report. When changing a setting value, the printer is rebooted. Specifies
  • Oki C830dn | User Guide - Page 57
    in Functions/Print Statistics/ Usage Report. Resets the main counter to zero. When executing this menu, resets the main counter to zero and exits menu. Enable must be selected in Functions/Print Statistics/ Usage Report. Resets the Supplies counter to zero. Changes the password. Enable must be
  • Oki C830dn | User Guide - Page 58
    stationery and store it in the printer for use whenever you need it. If you have chosen to install the PCL driver, macros perform a similar function. You to create an overlay: 1. Create the form data using your own application software and print it to a printer (.PRN) file. 2. Use the Storage
  • Oki C830dn | User Guide - Page 59
    box appears confirming that a filter file has been created, click OK to clear the message. 8. The project window will display one.HST file for each printer file added. Make a careful note of each of these names. Ensure that you note them exactly as they appear, they are case sensitive, and you
  • Oki C830dn | User Guide - Page 60
    options you will require, ensuring that the target printer is your PostScript printer driver in which the overlays have been defined. 3. CREATING PCL OVERLAYS Three steps are required to create an overlay: 1. Create the form data using your own application software and print it to a printer (.PRN
  • Oki C830dn | User Guide - Page 61
    . 3. Make sure that the selected printer name (1) is that of 1 3 your PCL printer driver. 2 4. Select the Print To color command filters checked, the black oval will print as a black rectangle when the overlay is used. To maintain the oval shape, turn off (deselect) the "Configure Image Data
  • Oki C830dn | User Guide - Page 62
    note the overlay name or ID when you created them, you can find them using Storage Device Manager to view the project file, or the printer's Information Menu to print a file list and identify them from there. The new overlays will now appear in the Defined Overlays list in the
  • Oki C830dn | User Guide - Page 63
    on your letterhead overlay. 2. Open your application's Print... dialogue and choose any options you will require, ensuring that the target printer is your PCL printer driver in which the overlays have been defined. 3. Click the Properties button to open the Printing Preferences window. 4. On the
  • Oki C830dn | User Guide - Page 64
    print job > Transfer belt: Approximately 80,000 A4 pages. > Fuser: Approximately 100,000 A4 pages. C830 CONSUMABLE ORDER DETAILS ITEM LIFE ORDER NO. Toner, black Toner, cyan Toner, magenta Toner, yellow Image drum, black Image drum, cyan Image drum, magenta Image drum, yellow Fuser, 120V
  • Oki C830dn | User Guide - Page 65
    Toner, black Toner, cyan Toner, magenta Toner, yellow Image drum, black Image drum, cyan Image drum, magenta Image drum . The toner used in this printer is a very fine dry powder. It is contained in four cartridges: one each for cyan, magenta, yellow and black. Have a sheet of paper
  • Oki C830dn | User Guide - Page 66
    Do not touch. 2. Note the positions of the four toner cartridges (a) and image drums (b).It is essential that they go back in the same order. a b 3. Pull the colored toner release lever (a) on the cartridge to be replaced fully towards the front of the printer. b a 4. Lift the right-hand end of the
  • Oki C830dn | User Guide - Page 67
    11. Pressing gently down on the cartridge to ensure that it is firmly seated, push the colored lever (c) towards the rear of the printer. This will lock the cartridge into place and release toner into the image drum unit. 12. Finally, close the top cover and press down firmly at both sides so that
  • Oki C830dn | User Guide - Page 68
    labelled. Do not touch. 2. Note the positions of the four cartridges (a) and image drums (b). It is essential that they go back in the same order. a b 3. Holding it by its top centre, lift the image drum, complete with its toner cartridge, up and out of the printer. Replacing consumable items > 68
  • Oki C830dn | User Guide - Page 69
    unit needs to be out of the printer for longer than this, please wrap the cartridge inside a black plastic bag to keep it away from light. Never expose the drum to direct sunlight or very bright room lighting. 5. With the colored toner release lever to the right, pull the lever towards you. This
  • Oki C830dn | User Guide - Page 70
    Push the colored release lever away from you to lock the toner cartridge onto the new image drum unit and release toner into it. 10. Holding the complete assembly by its top centre, lower it into place in the printer, locating the pegs at each end into their slots in the sides of the printer cavity
  • Oki C830dn | User Guide - Page 71
    This area is clearly labelled. Do not touch. 2. Note the positions of the four toner cartridges (a) and image drums (b).It is essential that they go back in the same order. a b 3. Lift each of the image drum units out of the printer and place them in a safe place away from direct sources of heat and
  • Oki C830dn | User Guide - Page 72
    fasteners (a) 90° to the right until they lock. This will secure the belt unit in place. 9. Replace the four image drums, complete with their toner cartridges, into the printer in the same sequence as they came out: cyan (nearest the rear), magenta, yellow and black (nearest the front). 10. Finally
  • Oki C830dn | User Guide - Page 73
    FUSER REPLACEMENT The fuser is located inside the printer just behind the four image drum units. WARNING! If the printer has recently been powered on, some fuser components will be very hot. Handle the fuser with extreme care, holding it only by its handle, which
  • Oki C830dn | User Guide - Page 74
    lock the fuser in place. b Finally, close the top cover and press down firmly at both sides so that the cover latches closed. 9. Switch the printer ON. CLEANING THE LED HEAD Clean the LED head when printing does not come out clearly, has white lines or when text is blurred. 1. Switch off the
  • Oki C830dn | User Guide - Page 75
    INSTALLING UPGRADES This section explains how to install optional equipment into your printer. This includes: > duplex (two-sided printing) unit; page 76: > additional RAM memory (C830 only) page 77 > hard disk drive (C830 only). page 80 > additional paper tray(s) page 82 Installing upgrades > 75
  • Oki C830dn | User Guide - Page 76
    making large documents easier to handle. It also enables booklet printing, which uses even less paper and makes large documents even easier to handle. The duplex unit slides straight into the rear of the printer and requires no tools to install. 1. Unpack the new unit and remove any transit material
  • Oki C830dn | User Guide - Page 77
    MEMORY UPGRADE (C830 ONLY) The basic C830 printer model comes equipped with 256MB of main memory. edge of the side cover slightly and pull the cover away from the printer at the top. Lift the cover slightly to detach it from the printer. Place it safely to one side. 6. Carefully remove the new memory
  • Oki C830dn | User Guide - Page 78
    memory board has a small cutout in the edge connector, which is closer to one end than the other. 8. Identify the RAM expansion slot in the printer. 9. If the RAM expansion slot already contains a memory upgrade board, that board will have to be removed before you can install the new one. To
  • Oki C830dn | User Guide - Page 79
    16. When the printer is ready, print a menu map as follows: (a) Press the Enter button. Near the top of the page, between the two horizontal lines, you will see the current printer configuration. This list contains the figure for total memory size. This should indicate the total memory now installed.
  • Oki C830dn | User Guide - Page 80
    HARD DISK DRIVE (C830 ONLY) The optional internal hard disk drive (HDD) enables (philips type) screwdriver. 1. Switch the printer off and disconnect the AC power cable. 2. Press the cover release and open the printer's top cover fully. WARNING! If the printer has been powered on recently, the fuser
  • Oki C830dn | User Guide - Page 81
    to latch it closed. 10. All that remains is to adjust the printer driver to make full use of the new features ("Adjusting printer drivers" on page 83). 11. Reconnect the AC power cable and switch the printer on. 12. When the printer is ready, print a menu map as follows: (a) Press the Enter button
  • Oki C830dn | User Guide - Page 82
    location. 3. Observing safety rules for lifting and, using locating guides (a), place printer on top of the additional paper tray(s). a a 4. Re-connect the AC power cable and switch the printer ON. All that remains is to adjust the printer driver to make full use of the new features ("Adjusting
  • Oki C830dn | User Guide - Page 83
    OK to close the properties window, and then close the Printers window. MACINTOSH If you have added additional hardware to your printer, these must be enabled in the printer driver. Additional hardware may include extra paper trays, a printer hard disk or a duplex unit. NOTE This is required for
  • Oki C830dn | User Guide - Page 84
    Panther (Mac OS X 10.3) 1. Open the Mac OS X Print & Fax Preferences. 2. Select Printing. 3. Select Set Up Printers... 4. Ensure your machine is selected and select Show Info... 5. Select the menu and choose Installable Options... 6. Select any options appropriate to your hardware and click
  • Oki C830dn | User Guide - Page 85
    JAMS Provided that you follow the recommendations in this guide on the use of print media, and you keep the media in good condition prior to use, your printer should give years of reliable service. However, paper jams occasionally do occur, and this section explains how to clear them quickly and
  • Oki C830dn | User Guide - Page 86
    * 383 372 Duplex unit * 390 373 Duplex unit * 391 380 Paper feed 392 381 Paper path 400 Paper exit Duplex unit * MP Tray Paper Tray 2nd Paper tray * Paper size * (if fitted). 1. If a sheet is well advanced out of the top of the printer, simply grip it and pull gently to draw it fully
  • Oki C830dn | User Guide - Page 87
    Holding it by its top centre, lift the cyan image drum, complete with its toner cartridge, up and out of the printer. 5. Put the assembly down gently onto a piece of paper to prevent toner from marking your furniture and to avoid damaging the green drum surface, and cover. CAUTION! The green image
  • Oki C830dn | User Guide - Page 88
    procedure for each of the remaining image drum units. 7. Look into the printer to check whether any sheets of paper are visible on any part of the carefully lift the sheet from the belt and pull it forwards into the internal drum cavity and withdraw the sheet. (b) To remove a sheet from the central
  • Oki C830dn | User Guide - Page 89
    towards the front of the printer to release the fuser. Withdraw release the fuser's grip on the sheet. Pull the trapped paper from the fuser. b c a (e) Replace fuser unit into Starting with the cyan image drum unit nearest the fuser, replace the four image drums into the drum cavity, making sure to
  • Oki C830dn | User Guide - Page 90
    the sides of the printer cavity. 9. Lower the top cover but do not press down to latch it closed yet. This will protect the drums from excessive exposure to . 11. If you are not using the rear exit tray, close it once any paper has been removed from this area. 12. If a duplex unit is fitted, lift
  • Oki C830dn | User Guide - Page 91
    guides are properly positioned against the edges of the paper stack. When satisfied, replace the tray. 16. Finally, close the top cover and press down firmly so that the cover latches closed. When the jam has been cleared, if Jam Recovery is set to ON in the System Configuration Menu, the printer
  • Oki C830dn | User Guide - Page 92
    minute color / 32 pages per minute monochrome 600 x 600, 1200 x 600dpi or 600 x 600dpi x 2bit (ProQ2400) C810 C830 GDI XPS (Vista & Server 2008 only Auto registration Auto density adjustment Auto consumable counter reset C810 PostScript 3 PCL 5c, HP-GL, PCL XL, PCL 6 Epson FX IBM Pro Printer
  • Oki C830dn | User Guide - Page 93
    Toner drum) Replacement: CMYK: 8,000 images Image drum 17W (C830) paper size, media weight and paper feed. b. As defined by ISO/IEC 19798 c. To comply with the requirements of Energy Star, when no data is present for a set period of time, the printer goes into a power-saving mode. The printer
  • Oki C830dn | User Guide - Page 94
    language of the printer's display. Profile Assistant (C830) Helps you to load and manage color profiles. NIC Setup Utility Use to set up the [printer network card. PS Gamma Adjuster (C830) Customize the CMYK data curves used with your printer driver. Once you have created the customized curve in the
  • Oki C830dn | User Guide - Page 95
    models. Download PCL macros, Postscript forms and bar codes to the printer hard disk drive for use in print jobs. Job Accounting Utility Use to control printer access and to monitor consumables usage. PS Gamma Adjuster (C830) Permits adjustment of each of the primary colors that the printer uses in
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95