Oki C830dn User Guide - Page 43
Enable, Normal, Auto Negotiate, Long Edge, 600x1200dpi
View all Oki C830dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
ITEM Network Setup (cont.) Print Setup SETTINGS EXPLANATION SNMP Enable Disable Sets Enable/Disable of SNMP. Enable: SNMP is available. Disable: SNMP is not available. TCP/IP or NetWare should be enabled. Network Scale Normal Small When Normal is selected, the network can work effectively even when it is connected to a HUB that has a spanning tree feature. However, printer start up time gets longer when computers are connected with two or three small LANs. When Small is selected, computers can cover from two or three small LANs to a large LAN, but may not work effectively when the network is connected to a HUB with a spanning tree feature. Hub Link Setting Auto Negotiate 100Base-TX Full 100Base-TX Half 10Base-T Full 10Base-T Half Sets a method to link to a HUB. When Auto is set, a connection method to a HUB is selected automatically. Factory Defaults? Execute Specifies whether to initialize the network factory default settings for the Network. Personality Auto PostScript PCL IBM PPR EPSON FX Selects a printer language. Copies 1- 999 Selects the default number of copies. Duplex On/Off Specifies Duplex print (option) if a Duplex unit is installed and enabled Binding Long Edge Short Edge Specifies Binding in duplex printing (if a Duplex unit is installed and enabled) Media Check Enable Disable Sets whether the printer checks the matching of printed data size and that of the tray. Only standard sizes are checked. Resolution 600dpi 600x1200dpi 600dpi multilevel. Sets default resolution. Toner Save Mode On/Off This function works effectively only if the data input is color RGB data. This setting is valid in PS and PCL, but does not take effect in the following cases. (1) PS: If Color Matching is set OFF. (2) PS: If any setting other than ASIC Color Matching is set. (3) PS: CMYK data when Ink Simulation Mode is used (valid in any other cases except Case (1) and Case (2) above as long as data is RGB). (4) PCL binary data (Color/Monochrome). Menu functions - C830 > 43