Oki C830dn User Guide - Page 44

ITEM Print Setup (cont.) PS Setup SETTINGS EXPLANATION Mono-Print Speed Auto Mono 32ppm Color Speed Mixed Speed Sets the monochrome print speed. Prints at the most appropriate speed for page process if Auto is set. Prints always at the color print speed if Color is set. Prints always at the monochrome print speed if Normal is set. Prints always at 26ppm of the gradation print speed for both color and monochrome print if High Quality is set. Default Orientation Portrait Landscape Specifies print orientation. Not valid for PS (valid only for PCL/ IBMPPR/EPSONFX/ HP-GL2). Form Length 5 lines ~ 64 lines ~ 128 lines Sets the number of lines that can be printed on a page Not valid for PS (valid only for PCL/HP-GL2). Default values listed to the left are for Letter/A4. In practice, however, they change according to the size of paper loaded in the tray. Edit Size Cassette Size/ A3/A4 Short Edge/A4 Long Edge/A5/A6/B4/ B5 Short Edge/ B5 Longt Edge/ Legal14/ Legal13.5/ Legal13/Tabloid/ Letter Short Edge/Letter Long Edge/ Executive/ Custom/Com-10 Envelope/DL Envelope/C5/C4/ Sets the size of an area to draw when the host PC does not specify the size via the paper edit size designating command (Not valid for PS - only for PCL). X Dimension 64 mm ~ 210 mm ~ 297 mm Specifies paper width of Custom paper as a default value. Sets a paper size at right angles to the paper run direction. Y Dimension 105 mm ~ 297 mm ~ 1321 mm Specifies paper length of Custom paper as a default value. Sets a paper size in the same direction as the paper run direction. Network Protocol ASCII/RAW Specifies PS communication protocol mode of data from NIC port. (In RAW mode, Ctrl-T is invalid). PS models only. Parallel Protocol ASCII/RAW Specifies PS communication protocol mode of data from Centronics port. (In RAW mode, Ctrl-T is invalid). PS models only. USB Protocol ASCII/RAW Specifies PS communication protocol mode of data from USB port. (In RAW mode, Ctrl-T is invalid). PS models only. Menu functions - C830 > 44