Oki C830dn User Guide - Page 45
Resident, 00 CPI, column, Normal
View all Oki C830dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
ITEM PCL Setup SETTINGS Font Source Font Number Resident I0 ~ I90 Font Pitch Symbol Set 99.9 CPI ~ 10.00 CPI ~ 0.44 CPI PC-8 A4 Print Width 78 column 80 column White Page skip On/Off CR Function CR/CR+LF LF Function LF/LF+CR Print Margin Normal 1/5 inch 1/6 inch EXPLANATION Specifies the location of PCL default font. Sets the PCL font number. The valid range of this variable changes depending on the FONT SOURCE setting at the time. If the default font is set for FONT SOURCE, the number starts at 0. If it is not, the number starts at 1. The maximum value is equal to the number of fonts installed in FONT SOURCE. Width of the PCL default font in characters per inch (CPI). Default font is fixed-pitch, scalable font. The value of pitch is displayed down to the second decimal place. Displayed only when the font selected in Font No. is a fixed-spacing, scalable font. Sets the symbol set of PCL (see machine operator panel for complete list). Sets the number of characters for A4 paper. Auto LF. This is for 10-CPI characters when Auto CR/LF Mode is set to OFF. This menu is enabled only when A4 paper is selected in the menu that sets the print width of A4 paper in portrait orientation. Usually, such A4 paper print width is set slightly narrower than 8 inches (about 7.93 inches). This setting cannot print 80 10-cpi characters (only prints up to 78 10-cpi characters). 80 characters set at A4 Print Width widen the right and left margins. A PCL command selects or selects/deselects Auto CR/LF mode. Sets whether to eject a page without any data to print (blank page) upon reception of FF command (OCH) in PCL Mode. OFF: Ejecting. Sets action when CR code is received in PCL. CR: Carriage Return CR+LF: Carriage Return and Line Feed Sets action when LF code is received in PCL. LF: Line Feed LF+CR: Line Feed and Carriage Return Sets a non-printable area of paper. The width of the area along the right and left sides of paper (left and right sides depend on paper orientation). NORMAL: PCL emulation compatible, approximately 1/ 4~1/4.3INCH (depending on paper) is outside the printable area. Menu functions - C830 > 45