Oki C942 C911dn/C931dn/C931DP/C941dn/C941DP/C942 Basic Users Guide - English - Page 117
Adding Printers Using LPD (TCP/IP) Protocols, Preparations, Procedure for Adding Printers - okidata
View all Oki C942 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Adding Printers Using LPD (TCP/IP) Protocols zzAdding Printers Using LPD (TCP/IP) Protocols With Mac OS X environments, you can connect printers using LPD protocols (TCP/IP). 1 Apple Talk cannot be used with Mac OS X 10.6 or later, so for network connections, connect the printer using Bonjour (Rendezvous) protocols or LPD protocols (TCP/IP). Before use Preparations 1 Check that the IP address, subnet mask, and router address, etc., have been set correctly for the desired Mac OS, and that you are connected to the network using LPD protocols (TCP/IP). 2 Download the PPD installer for Mac OS X for the printer to be connected from the OKI Data homepage (http:// www.okidata.co.jp/), unzip and start the PPF installer, and then install PPD on the relevant Mac OS. This step is unnecessary if PPD is already installed. 3 Set the IP address, subnet mask, and gateway address, etc., on the printer to be connected. Make sure the printer is turned ON, and connected to the TCP/ IP network environment. Procedure for Adding Printers 2 1 Open the Mac OS system environment settings, and click the "Print & Scan" icon to open the "Print & Scan" screen. 3 4 2 Click the [+] button to open the "Add printer" screen. Printing Setting Up Basic Device Operations Appendix Index - 117 -