Oki C9600n Guide: Network User's, OkiLAN 8200e - Page 188

Example, sd: The spool directory.

Page 188 highlights

or by the DHCP/RARP server) or with the network. Reset the network interface card settings to their defaults and then try to set a temporary IP address. If you still have the problem after resetting the network interface card, consult the network manager. 4. Register the printer in the /etc/printcap file. Example: For host name PRINTER, to create a queue called PRINTER_lp: PRINTER_lp: \ :lp=:rm=C7400:rp=lp:\ :sd=/usr/spool/PRINTER_lp:\ :lf=/usr/spool/PRINTER_lp/PRINTER_lp_errs: PRINTER_lp The name of the printer queue lp: The name of the device used to connect to the printer. Does not need to be specified for a remote machine. rm: The name of the host of the remote printer. This should be the same as the name added to the /etc/hosts file. rp: The name of the printer on the remote printer. It should be lp. sd: The spool directory. Give the absolute path. lf: The error log file. Give the absolute path. 5. Create the spool directory and error log file. Example For spool Directory PRINTER_lp and Error Log file PRINTER_lp_errs # mkdir /usr/spool/PRINTER_lp # touch/usr/spool/PRINTER_lp/PRINTER _lp_errs # chown -R daemon /usr/spool/PRINTER_lp # chgrp -R # daemon /usr/spool/PRINTER_lp 6. Check that lpd (printer daemon) is activated. # ps aux | grep lpd OkiLAN 8200e Network User's Guide 188

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264

OkiLAN 8200e Network User’s Guide
188
or by the DHCP/RARP server) or with the network. Reset the
network interface card settings to their defaults and then try to
set a temporary IP address. If you still have the problem after
resetting the network interface card, consult the network
manager.
4. Register the printer in the
/etc/printcap
file.
Example:
For host name PRINTER, to create a queue called PRINTER_lp:
PRINTER_lp: \
:lp=:rm=C7400:rp=lp:\
:sd=/usr/spool/PRINTER_lp:\
:lf=/usr/spool/PRINTER_lp/PRINTER_lp_errs:
PRINTER_lp
The name of the printer queue
lp: The name of the device used to connect to the printer.
Does not
need to be specified for a remote machine.
rm: The name of the host of the remote printer. This should be the
same as the name added to the
/etc/hosts
file.
rp: The name of the printer on the remote printer.
It should be lp.
sd: The spool directory.
Give the absolute path.
lf: The error log file. Give the absolute path.
5. Create the spool directory and error log file.
Example
For spool Directory PRINTER_lp and Error Log file PRINTER_lp_errs
# mkdir /usr/spool/PRINTER_lp
# touch/usr/spool/PRINTER_lp/PRINTER _lp_errs
# chown –R daemon /usr/spool/PRINTER_lp
# chgrp –R # daemon /usr/spool/PRINTER_lp
6. Check that lpd (printer daemon) is activated.
# ps aux | grep lpd