Oki C9600n Guide: Network User's, OkiLAN 8200e - Page 213

EtherTalk, Not identified by the Chooser and the Setup Utility.

Page 213 highlights

Troubleshooting: EtherTalk Not identified by the Chooser and the Setup Utility. • Turn the printer off and on again. • Make sure the network cable is correctly connected. • Change the cable and try again. • If the network resides in a Zone, make sure the correct Zone name is selected in the Chooser. • Make sure the Zone name in the utility related to the NIC is the same as the Zone name set in NIC. • Make sure AppleTalk, which is displayed at the right bottom of the Chooser, is set to Enable. (In some OS versions Network is used instead of AppleTalk.) • Make sure Ethernet is selected in AppleTalk. (In some OS versions Network is used instead of AppleTalk.) • Make sure the print driver is selected in the Chooser. • Make sure the EtherTalk protocol is set to Enable. • Print the NIC settings (see page 12) and confirm that the EtherTalk Port name is not blank. OkiLAN 8200e Network User's Guide 213

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264

OkiLAN 8200e Network User’s Guide
213
Troubleshooting:
EtherTalk
Not identified by the Chooser and the Setup Utility.
Turn the printer off and on again.
Make sure the network cable is correctly connected.
Change the cable and try again.
If the network resides in a Zone, make sure the correct Zone name is
selected in the Chooser.
Make sure the Zone name in the utility related to the NIC is the same as
the Zone name set in NIC.
Make sure AppleTalk, which is displayed at the right bottom of the
Chooser, is set to Enable. (In some OS versions Network is used instead
of AppleTalk.)
Make sure Ethernet is selected in AppleTalk. (In some OS versions
Network is used instead of AppleTalk.)
Make sure the print driver is selected in the Chooser.
Make sure the EtherTalk protocol is set to Enable.
Print the NIC settings (see page 12) and confirm that the EtherTalk Port
name is not blank.