Oki C9600n Guide: Network User's, OkiLAN 8200e - Page 218
If the printer setup does not, appear, On the [Security] tab, click [Cipher SSL
View all Oki C9600n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
Problem Solution If the printer setup page does not appear: IPP is not enabled. Enable IPP. See page 141. The browser version is old. Make sure you are using either • Internet Explorer 5.5 or higher Open the browser, then select [About Internet Explorer] in the [Help] menu or • Netscape Navigator version 6 or higher Open the browser, then select [About Netscape] in the [Help] menu. The encryption strength is set to [Strong]. • Use Internet Explorer 5.5 or higher or Netscape Navigator 6.2 or higher as your browser. • Change the encryption strength of the printer to Weak. Using the web browser: 1. Open the browser and type in the print server's IP Address, then press the Enter key. 2. Login. 3. On the [Security] tab, click [Cipher (SSL/ TLS)] → [Cipher Level Settings] 4. Change the setting to [Weak] and click [OK]. 5. Close the web browser. Using AdminManager: 1. Launch the AdminManager utility and login. 2. Click the printer in the list, then click [Setup] →[OKI Device Setup]. 3. Enter your password, click [OK]. 4. Click the [SSL/TLS] tab. 5. Change [Encryption Strength] to [Weak] and click [Apply]. 6. Close the utility. OkiLAN 8200e Network User's Guide 218