Olympus DS 2300 DS-2300 Online Instructions (English) - Page 37
Setting the, switch to the HOLD, position., Remember to reset the, switch when, using the recorder.
UPC - 050332153530
View all Olympus DS 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Hold Setting the HOLD switch to the HOLD position. If you set the recorder to HOLD status by sliding the HOLD switch in the direction of the arrow, the current conditions will be preserved, and all buttons and switches except the HOLD switch will be disabled. This feature is useful when the recorder has to be carried in a bag or pocket. 3 Remember to reset the HOLD switch when using the recorder. Hold ...Notes • The display will flash if the switch is moved to hold in the stop status. At this time, if any button is pressed the clock display will flash for about 2 seconds, but will not operate. • If the switch is moved to hold during playback (or recording), the playback (recording) status will stay and cannot be operated. (When playback has ended and the recording has ended due the remaining memory being used up, it will be in the stop state.) 37