Olympus WS-310M WS-300M Instructions (English) - Page 11
Turning Off the Power, Turning On the Power
UPC - 050332299368
View all Olympus WS-310M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Power Supply When the recorder is not used, setting it to HOLD turns off the recorder, suppressing the consumption of the battery to a minimum. 1 Even if the power is turned off, the existing data, settings of each mode, and clock setting will be maintained. To turn the power on, cancel the HOLD switch. Power Supply Turning Off the Power Move the HOLD switch to the HOLD position while the recorder is not in operation. After "Hold" is displayed, flashing for 2 seconds, the display will turn off. Turning On the Power Release the HOLD switch of the recorder. Standby Mode and Display Shut Off If the recorder is stopped/not used for over 5 minutes after it is turned on, it goes into standby (power-save) mode, and the display shuts off. To exit standby mode and turn on the display, press any button. 11