Olympus WS-310M WS-300M Instructions (English) - Page 73
Setting the, switch to the HOLD position., Remember to reset the HOLD switch when using the,
UPC - 050332299368
View all Olympus WS-310M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Hold Setting the HOLD switch to the HOLD position. If you set the recorder to HOLD status by sliding the HOLD switch in the direction of the arrow, the current conditions will be preserved, and all buttons and switches except the HOLD switch will be disabled. This feature is useful when the recorder has to be carried in a bag or pocket. Remember to reset the HOLD switch when using the recorder. ... Notes • If you switch to the Hold mode during stop status, the display will be turned off. Pressing any button during 5 this status will make the clock display flash for 2 seconds, but will not operate the recorder. Hold • If HOLD is applied during playback (recording), operation is disabled with the playback (recording) state unchanged. (When playback has ended and the recording has ended due the remaining memory being used up, it will be in the stop state.) 73