Onkyo TX-DS838 Owner Manual - Page 44

Setting the Surround mode parameters LFE (Low Frequency Effect) Level Attenuation (DOLBY DIGITAL (AC-3) Surround mode only) If the reproduced bass is too loud, set this parameter to "-10dB" io decrease the Low Frequency Effect in the low-frequency channel by 10 dB. Cinema Re-EQ (DOLBY DIGITAL (AC-3) or DOLBY PRO LOGIC Surround modes only) Motion pictures are produced on the assumption that they will be shown at a large cinema. If they are shown in a small room, the high-frequency range sound will be raised, resulting in an uncomfortable sound. If your system is placed in a small room, set this parameter to "ON" to reproduce an optimal sound for the home theater system. * Re-EQ is licensed from Lucasfilm Ltd. U.S. patent numbers 5,043,970; 5,189,703; 5,222,059. Foreign patents pending. Lucasfilm and Re-EQ are trademarks of Lucasfilm Ltd. ACTION/DRAMA/MUSICAL Emphasis These parameters bring out even more the ACTION, DRAMA or MUSICAL effects. The emphasis can be set between 0.4 and 1.6. Hall Size/Arena Size/Stadium Size These parameters allow you to set the size of the hall/arena/stadium. The size can be selected from seven settings between 0.4 and I .O. clavic"se-o. * fa l l S I ze * ESC .8 SriallerEICLarger Hall Shape You can select from seven hall shape settings between 0.4 and 1.6, indicating the ratio of hall breadth to length. 0.4 to 0.8 simulate rectangular shapes, 1.0 simulates a square shape and 1.2 to 1 .6 simulate oblong shapes. 001,1"1.7,40 * H a 1 1 S. haee ESC 0. DeepesEINIdes Dialog Fade (STADIUM Surround mode only) When you wish to remove the announcer's voice while watching a sports broadcast, set this parameter to "ON". It may be difficult or not possible to remove the announcer's voice from some sources. 44