Onkyo TX-DS838 Owner Manual - Page 49

Specifications AMPLIFIER SECTION Power output: Stereo model (Surround mode: OFF) L and R FRONT SPEAKERS 100 watts per channel min. RMS. at 8 ohms; both chan- nels driven between 20 Hz and 20,000 Hz with no more than 0.08 % total harmonic distortion. Continuous power 2 x 150 Watt at 6 ohms (DIN) Surround mode L and R FRONT and CENTER SPEAKERS 90 watts per channel min RMS. at 8 ohms three channels driven from 20 Hz to 20,000 Hz, with no more than 0.08% total harmonic distortion. L and R SURROUND SPEAKERS 50 watts per channel min. RMS. at 8 ohms; both channels driven from 20 Hz to 20,000 Hz with no more than 0.08% total harmonic distortion. IM distortion: 0.08% at rated power (L and R) Damping factor: 60 at 8 ohms (L and R) Input sensitivity/impedance: Phono: 2.5 mV/50 kohms Line (CD, TAPE-1 and - 2,VIDEO-1 - 4): 150 mV/50 kohms Output level/impedance: OUTPUT (REC) (TAPE-1 and -2): 150 mV/2.2 kohms OUT (VIDEO 1, 2): 150 mV/2.2 kohms PRE OUT (LEFT, RIGHT, LEFT SURROUND, RIGHT SURROUND, SUBWOOFER, CENTER): 1V/470 ohms Phono overload: 120 mV RMS. at 1,000 Hz, 0.5 % THD. Frequency response: 20 to 30,000 Hz, +/-0.5 dB RIAA deviation: 20 to 20,000 Hz, +/-0.8 dB Tone control: BASS: +/-10 dB at 50 Hz MIDBASS: +/-10 dB at 300 Hz TREBLE: +/-10 dB at 10,000 Hz ,ignal-to-noise ratio: PHONO: 80 dB (IHF A, 5mV input) (Surround mode: OFF) CD/TAPE: 100 dB (IHF A) Muting: -.OdB VIDEO SECTION Television format: NTSC (U.S. and Canadian models) NTSC/PAL (Other models) Input sensitivity/impedance IN (VIDEO-1 . 4) VIDEO (Composite): 1 Vp-p/75 ohms IN (VIDEO-1 - 4) S-VIDEO (Y signal): 1 Vp-p/75 ohms IN (VIDEO-1 4) S-VIDEO (C signal): 0.28 Vp-p/75 ohms Output level/impedance OUT (VIDEO-1 - 2, MONITOR OUT ) VIDEO (Composite): 1 Vp-p/75 ohms OUT (VIDEO-1 - 2, MONITOR OUT) S-VIDEO (Y signal): 1 Vp-p/75 ohms OUT (VIDEO-1 - 2, MONITOR OUT) S-VIDEO (C signal): 0.28 Vp-p/75 ohms TUNER SECTION FM: Tuning range: Usable sensitivity: 50-dB Quieting sensitivity: Capture ratio: Image rejection ratio: IF rejection ratio: Signal-to-noise ratio: Alternate channel Attenuation: AM suppression ratio: Harmonic distortion: Frequency response: Stereo separation: Muting level: 87.50 - 108.00 MHz (50 kHz steps) Mono: 11.2 dBf, 1.0 µV (75 ohms) Stereo: 17.2 dBf, 2.0 µV (75 ohms) Mono: 17.2 dBf, 2.0µV (75 ohms) Stereo: 37.2 dBf, 20 µV (75 ohms) 1.5 dB 40 dB (U.S. and Canadian models) 85 dB (European models) 85 dB (Woldwide model) 90 dB Mono: 76 dB Stereo: 70 dB 55 dB 50 dB Mono: 0.1% Stereo: 0.2% 30 - 15,000 Hz ± 1.0 dB 45 dB at lkHz 30 dB between 100 and 10,000 Hz 17.2 dBf AM: Tuning: U.S. and Canadian models 530 to 1710 kHz (10 kHz steps) European models 522 to 1611 kHz (9 kHz steps) Worldwide model 530 to 1710 kHz (10 kHz steps) or 531 to 1602 kHz (9 kHz steps) Usable sensitivity: 30 µV Image rejection ratio: 40 dB IF rejection ratio: 40 dB Signal-to-noise ratio: 40 dB Harmonic distortion: 0.7% (ANIMAL Power supply: U.S. and Canadian models AC120V, 60 Hz European models AC 230V, 50 Hz Worldwide model 120/220 - 230 V switchable, 50/60 Hz Dimensions (W x H x D): 435 x 175 x 428 mm (17-1/8"x 6-7/8"x 16-7/8) Weight: 16.5 kg (36.4 lbs.) REMOTE CONTROL RC-P101S, RC-P201S Transmitter: Infrared Signal range: Approx. 5 meters (16 ft.) Power supply: Two AA batteries (1.5 V x 2) Specifications and features are subject to change without notice. DIGITAL SECTION Digital input sampling frequency: 32, 44.1, 48 kHz Input sensitivity/impedance: Coaxial: 0.5 Vpp/75 ohms AC-3RF: 0.4 Vpp/75 ohms ntegrik 49