Panasonic DMC-FX5 Digital Still Camera - Page 14
Setting Date/Time (Clock Set
UPC - 037988977581
View all Panasonic DMC-FX5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Preparation • The data on the built-in memory or the card may be damaged or lost due to electromagnetic waves, static electricity or breakdown of the camera or the card. We recommend storing important data on a PC etc. • Do not format the card on your PC or other equipment. Format it on the camera only to ensure proper operation. (P90) • Keep the Memory Card out of reach of children to prevent swallowing. Setting Date/Time (Clock Set) ∫ Initial setting The clock is not set so the following screen appears when you turn the camera on. 2 Move 3/4/2/1 to select the date and time. : : A Time at the home area B Time at the travel destination (P53) • 2/1: Select the desired item. • 3/4: Set the display order for the date and time. • : Cancel without setting the clock. 3 Press [MENU/SET] to set. • Turn the camera off after setting the clock. Then set the mode dial to a recording mode to turn the camera on and check whether or not the clock setting is correct. OFF ON Changing the clock setting 1 Press [MENU/SET]. 2 Move 3/4 to select [CLOCK SET]. 3 Move 1 and then perform steps 2 and 3 to set the clock. 4 Press [MENU/SET] to close the menu. • You can also set the clock in the [SETUP] menu. (P17) A Mode dial B [MENU/SET] button Joystick 1 Press [MENU/SET]. 14 VQT1J59 • When a fully charged battery has been inserted for more than 24 hours, charging of the built-in battery for the clock is completed so the clock setting will be stored (in the camera) for at least 3 months even if the battery is removed. (If you insert a battery that is not sufficiently charged, the length of time that the clock setting is stored may become less.) However the clock setting is canceled after this time. In this case, set the clock again.