Panasonic DMC-FX5 Digital Still Camera - Page 63
BURST], Taking Pictures using Burst
UPC - 037988977581
View all Panasonic DMC-FX5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
• The camera uses movement detection when automatically setting the ISO sensitivity in the following cases. - In intelligent auto mode [ ] - In [SPORTS], [BABY1]/[BABY2] and [PET] in scene mode - When [INTELLIGENT ISO] is set • The stabilizer function may not be effective in the following cases. - When there is a lot of jitter. - When the zoom magnification is high. - In digital zoom range. - When taking pictures while following a moving subject. - When the shutter speed becomes slower to take pictures indoors or in dark places. Be careful of camera jitter when you press the shutter button. • The setting is fixed to [MODE2] with [SELF PORTRAIT] in scene mode and to [OFF] in [STARRY SKY] in scene mode. • You cannot be set to [OFF] in the intelligent auto mode [ ]. • In motion picture mode [ ], [MODE2] cannot be set. [BURST] Taking Pictures using Burst Press [ MENU /SET ] to display the [REC] mode menu and select the item to set. (P55) ∫ Number of pictures recorded in burst mode Burst speed Number of recordable pic- (pictures/ tures (pictures) second) 3¢ max. 4 max. 7 approx. 2 Depends on the remaining capacity of the built-in memory/card. ¢ The burst speed is constant regardless of the transfer speed of the card. Advanced (Recording pictures) • The number of pictures indicated is when the shutter speed is faster than 1/60 and the flash is not activated. • The burst speed (pictures/second) may become slower depending on the recording environment such as in dark places, if the ISO sensitivity is high etc. • If you take pictures in burst mode with the built-in memory, it will take time to write the picture data. • Hold down the shutter button fully to activate the burst mode. • You can have higher speed burst if you use [HI-SPEED BURST] in scene mode. Refer to P47 for information about [HI-SPEED BURST]. • When the burst mode setting is set to Unlimited - The burst speed becomes slower halfway. The exact timing of this depends on the type of card, the picture size and the quality. - You can take pictures until the capacity of the built-in memory or the card is full. • The focus is fixed when the first picture is taken. • The exposure and the white balance vary depending on the burst mode setting. When burst mode is set to [ ], they are fixed to the values set for the first picture. When the burst speed is set to [ ], they are adjusted each time you take a picture. • If you are following a moving subject while taking pictures in a place (landscape) indoors, outdoors etc. where there is a large difference between the light and shade, it may take time until the exposure is stable. If burst is used at this time, the exposure may not become optimal. • When the self-timer is used, the number of recordable pictures in burst mode is fixed to 3. • Burst mode is not canceled when the camera is switched off. • When auto bracket and burst mode are set simultaneously, auto bracket will be performed. • When burst mode is set, the auto review function is activated regardless of the auto 63 VQT1J59