Panasonic DMC-FX5 Digital Still Camera - Page 94
Printing the Pictures
UPC - 037988977581
View all Panasonic DMC-FX5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Connecting to other equipment Printing the Pictures By connecting the camera directly to a printer supporting PictBridge via the USB connection cable (supplied), you can select the pictures to print and start printing on the camera's screen. Set print settings such as the print quality on the printer beforehand. (Read the printer operating instructions.) 1 AV OUT • It may take time to print some pictures. Use a battery with sufficient battery power or the AC adaptor (DMW-AC5PP; optional) when you connect to a printer. • Turn the camera off before inserting or removing the cable for the AC adaptor (DMW-AC5PP; optional). 1 Turn on the camera and the printer. 2 Set the mode dial to [ ]. 3 Connect the camera to a printer via the USB connection cable A (supplied). • Connect the USB connection cable with the [ ] mark facing the [2] mark on the [DIGITAL] socket. • Hold the USB connection cable at 1 and insert straight in or take straight out. DIGITAL DC IN A USB connection cable (supplied) B AC adaptor (DMW-AC5PP; optional) 94 VQT1J59 • If the mode dial is not set to [ ] when the camera is connected to the printer, disconnect the USB connection cable, set the mode dial to [ ] and then connect the USB connection cable again. (Depending on the printer, it may be necessary to turn it off and then on again.) • Do not use any other USB connection cables except the supplied one. • If a card is not inserted when the camera is connected to the printer, you can access the picture data on the built-in memory. If a card is inserted, you can access the picture data on it. • You cannot switch between the built-in memory and the card while the camera is connected to the printer. When you want to switch between the built-in memory and the card, disconnect the USB connection cable, insert (or remove) the card and then connect the USB connection cable to the printer again. • If you want to print the age in [BABY1]/ [BABY2] or [PET] in scene mode or the number of days that have been passed since the departure date in