Panasonic PT-D6000ULK Functional Instructions - Page 10
Connections, Before connection to the projector, Pin assignments and signal names
UPC - 791871111871
View all Panasonic PT-D6000ULK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Getting Started Connections Before connection to the projector Read and follow the operating and connecting instructions of each peripheral device. The peripheral devices must be turned off. Use cables that match each peripheral device to be connected. If the input signal is affected by signal jitter, the projected image may have poor image quality and timebase correction is effective. Confirm the type of video signals. The projector accepts the following signals: VIDEO, S-VIDEO, analogue-RGB (with TTL sync. Level) and digital signal. Some computer models are not compatible with the projector. When using long cables to connect with each of equipment to the projector, there is a possibility that the image will not be output correctly unless a compensator is used. Pin assignments and signal names J S-VIDEO IN Pin No. 1 2 3 4 Signal names Ground (luminance) Ground (colour) Luminance signal Colour signal 4 3 2 1 J RGB2 IN Pin No. 1 2 3 12 13 14 15 Signal names R/PR G/G • SYNC/Y B/PB DDC data HD/SYNC VD DDC clock 4, 9: Not assigned 54321 5 - 8, 10, 11: GND terminals 10 9 8 7 6 15 14 13 12 11 J DVI-D IN Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 Signal names TMDS Data 2TMDS Data 2+ TMDS Data 2/4 shield DDC clock DDC data TMDS Data 1TMDS Data 1+ TMDS Data 1/3 shield Pin No. 13 14 15 16 17 18 19 20 21 22 23 24 Signal names +5V GND Hot Plug Detect TMDS Data 0TMDS Data 0+ TMDS Data 0/5 shield TMDS clock shield TMDS clock+ TMDS clock- ENGLISH - 10