Panasonic PT-D6000ULK Functional Instructions - Page 17

PICTURE menu WHITE GAIN You can adjust the brightness of white area of the image. Call up the bar scale by pressing I, H or the ENTER button, and press I H to adjust the value. I H Setting range: 0 to +10 More natural white Whiter NOISE REDUCTION You can select the automatic noise reduction system strength. Press I H to cycle through the options. OFF 1 2 3 Deactive Low Middle High SYSTEM DAYLIGHT VIEW You can keep the projected image bright and vivid even in welllit rooms where the ambient light sources cannot be controlled, such as when a door opens or when window coverings fail to block out sunlight. Press I H to cycle through the options. OFF 1 2 3 Deactive Low Middle High SHARPNESS You can adjust the sharpness of the projected image. Call up the bar scale by pressing I, H or the ENTER button, and press I H to adjust the value. I H Setting range: 0 to +15 Less sharp More sharp AI You can switch on/off the auto iris control system. Press I H to switch between ON or OFF. ON OFF Active Deactive SYSTEM SELECTOR When the input signal is changed, the projector detects the colour system and selects the matched setting automatically, or you can select manually. Press I H to cycle through the options. VIDEO/S-VIDEO terminal AUTO HNTSC HNTSC 4.43 HPAL HPAL-M HPAL-N HSECAM HPAL60 • AUTO is usually recommended. • Selecting options of AUTO are NTSC/NTSC 4.43/PAL/PAL- M/PAL-N/SECAM/PAL60. RGB 1 IN/RGB 2 IN terminal 480i/576i/576p signals RGB HYCBCR VGA60/480p signals: VGA60 H480p H480pRGB Other signals RGB HYPBPR • See "List of compatible signals" in the Operating Instructions that provided with the projector. SDI terminal (PT-DZ6710E only) AUTO H 1080⁄60i H 1035⁄60i H 720⁄60p H 1080⁄24p H 1080⁄50i H 1080⁄30p H 1080⁄25p H 1080⁄24sF H 720⁄50p H 480i H 576i Settings ENGLISH - 17