Panasonic PT-D6000ULK Functional Instructions - Page 43
Technical Information, STATUS, ENGLISH - 43
UPC - 791871111871
View all Panasonic PT-D6000ULK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
J STATUS Q Projector status Click the Projector status tab on the top. PROJECTOR TYPE MAIN VERSION INPUT INPUT AIR TEMPERATURE OPTICS MODULE TEMPERATURE AROUND LAMP TEMPERATURE LAMP1 RUNTIME/LAMP2 RUNTIME PROJECTOR RUNTIME SELF TEST Displays the type of projector. Displays the firmware version of the projector main unit. Displays the input switching status. Displays temperature of projector's intake air. Displays temperature inside the projector. Displays temperature around lamp units. Displays the lamp lit hours. Displays used hours of the projector. Displays self diagnosis information. Error information When Error (Detail) is displayed in SELF TEST in the status list, click (Detail) to display the error details. Click (Detail) Technical Information Parameter Description MAIN CPU BUS Trouble has occurred in the microcomputer circuitry. Consult your dealer. FAN Trouble has occurred in the fan or its drive circuit. Consult your dealer. INPUT AIR TEMPERATURE The input air temperature is too high. It may be that the projector is being used in an operating environment where the temperature is high such as near a heating appliance. OPTICS MODULE TEMPERATURE The temperature inside the projector is high. It may be that the projector is being used in an operating environment where the temperature is high such as near a heating appliance. AROUND LAMP TEMPERATURE The temperature around the lamp is too high. It may be that the projector's ventilation holes are blocked. LAMP1 REMAIN TIME LAMP2 REMAIN TIME The lamp runtime has exceeded the prescribed cumulative time, and it is now time to replace the lamp. LAMP1 STATUS LAMP2 STATUS The lamp has failed to light. Wait a short while for the lamp to cool off, and then turn on the power. SHUTTER Trouble has occurred in the shutter circuitry. Consult your dealer. Trouble has occurred in the sensor INPUT AIR TEMP.SENSOR used to detect the input air temperature. Consult your dealer OPTICS MODULE TEMP.SENSOR Trouble has occurred in the temperature detection sensor inside the projector. Consult your dealer. AROUND LAMP TEMP.SENSOR Trouble has occurred in the sensor used to detect the exhaust air temperature. Consult your dealer. BATTERY The backup battery has been run out. Consult your dealer. AIRFLOW SENSOR Trouble has occurred in the sensor used to detect the airflow volume. Consult your dealer. COLOR WHEEL Trouble has occured in the colour wheel or colour wheel or its drive circuit. Consult your dealer. COVER OPEN The lamp unit cover is not attached securely. Check the lamp unit compartment. ACF UNIT The air cleaning filter (ACF) is not installed or trouble has occurred. See the operating instructions booklet that is provided with the projector. FILTER REMAIN The filter remaining is getting less. See the operating instructions booklet that is provided with the projector. Appendix ENGLISH - 43