Panasonic PT-D6000ULK Functional Instructions - Page 16

PICTURE menu Remote control See "Navigating through the menu" on page 15. See "Main menu and Sub-menu" on page 12. COLOR You can adjust the colour saturation of the projected image. Call up the bar scale by pressing I, H or the ENTER button, and press I H to adjust the value. I H Setting range: -31 to +31 Lighter Darker PICTURE MODE Depending on the projection environment, you can use these preset parameter settings to optimise image projection. Press I H to cycle through the options. STANDARD CINEMA NATURAL DYNAMIC GRAPHIC Setting for a general image Setting for a cinema type movie Reproduces the original colour of the image Bright and sharp setting Setting for image from computers NOTE: • Factory default is STANDARD for moving images and GRAPHIC for RGB system. CONTRAST You can adjust the contrast of the projected image. Adjust the BRIGHTNESS in advance if necessary. Call up the bar scale by pressing I, H or the ENTER button, and press I H to adjust the value. I H Setting range: -31 to +31 Lower Higher BRIGHTNESS You can adjust the brightness of the projected image. Call up the bar scale by pressing I, H or the ENTER button, and press I H to adjust the value. I H Setting range: -31 to +31 Darker Brighter TINT You can adjust the skin tone in the projected image. Call up the bar scale by pressing I, H or the ENTER button, and press I H to adjust the value. I H Setting range: -31 to +31 More reddish More greenish COLOR TEMPERATURE You can adjust the white balance of the projected image. Select the required option and press I, H or the ENTER button to call up the bar scale. DEFAULT USER MIDDLE HIGH Balanced white More detailed adjustment More reddish More bluish Q Adjusting more detailed white balance You can adjust white balance of RGB individually in high and low level. 1. Select USER and press the ENTER button. 2. Select WHITE BALANCE HIGH or WHITE BALANCE LOW, and call up the scale bars by pressing I, H or the ENTER button. 3. Press I H to adjust the value of each colour. Setting range WHITE BALANCE HIGH: 0 to 255 (Default: 255) WHITE BALANCE LOW: 0 to 63 (Default: 32) NOTE: • With excessive unbalanced adjustment, such as extremely high with extremely low setting, all the colours may be displayed abnormally. Press the DEFAULT button to reset the selected item to the default setting. • Adjust COLOR TEMPERATURE with signal image. Internal test pattern is not for COLOR TEMPERATURE adjustment. Settings ENGLISH - 16