Panasonic PT-D6000ULK Functional Instructions - Page 45
Serial terminal, Technical Information, Connection, Pin assignments and signal names
UPC - 791871111871
View all Panasonic PT-D6000ULK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Technical Information Serial terminal The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connected to this connecter. J Connection Q Single projector Computer Connecting terminals on projector D-Sub 9-pin (female) Communication cable (straight) Q Multiple projectors D-Sub 9-pin (male) Connecting terminals on projector 1 D-Sub 9-pin (female) Connecting terminals on projector 2 D-Sub 9-pin (female) Computer D-Sub 9-pin (male) D-Sub 9-pin (male) Communication cable (straight) J Pin assignments and signal names Pin Female No. Signal name Contents 1 NC 2 TXD Transmitted data 3 RXD 4 Received data Connected internally 5 GND 6 Earth NC 7 CTS 8 RTS 9 J Communication settings Connected internally NC See "RS-232C" on page 29. Signal name RXD TXD GND RTS CTS Male Contents NC Received data Transmitted data Connected internally Earth NC Connected internally NC Signal level Sync. method Baud rate Parity RS-232C Asynchronous 9 600 bps None Character length Stop bit X parameter S parameter 8 bits 1 bit None None ENGLISH - 45 Appendix