Panasonic TH50PX500U TH42PX500U User Guide - Page 26

Menu Navigation PC Adjust CH -VOL OK VOL+ CH Press to select "PC Adjust". Press to display the PC Adjust screen. Picture 1/2 Normal Pic. mode Picture Brightness Color Tint Sharpness No Standard +30 0 0 0 +10 Picture 2/2 Color Temp Color Mng. C.A.T.S Zoom Adjust PC Adjust Other Adjust Cool Off Off During "RGB / PC" input signal. PC Adjust 1/2 Normal Sync Dot Clock H-Position V-Position No On G 0 0 0 Sync • H & V : The H and V sync signals are input from the HD/VD connector. • On G : Uses a synchronized signal on the Video G signal, which is input from the G connector. Dot Clock Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is blurred. H-Position Adjust the horizontal position. CH -VOL OK VOL+ CH V-Position Adjust the vertical position. CH -VOL OK VOL+ CH PC Adjust 2/2 Clock Phase Input Resolution 0 VGA H-Frequency V-Frequency 48.6kHz 60.3 Hz Clock Phase Alleviates the problem if the whole picture appears to flicker or is blurred. First adjust the Dot Clock to get as good a picture as possible, then adjust the Clock Phase so that a clear picture appears. Note : It may not be possible to display a clear picture due to poor input signals. Input Resolution Switches to wide display. Input signal switched from VGA to WVGA Input signal switched from XGA to WXGA H-Frequency/V-Frequency (Displays the frequencies of the PC signal currently being adjusted.) Displays the H (Horizontal)/V (Vertical) frequencies. Display range: Horizontal 15 - 110 kHz Vertical 48 - 120 Hz 26