Pfaff creative sensation Owner's Manual - Page 48

PFAFF® creative™ Color Touch Screen Stitch width safety Select this function when using a straight stitch presser foot to lock the needle in center position for all stitches, preventing damage to the needle and/or presser foot. This function is automatically selected, and cannot be deselected, when the straight stitch needle plate is attached. When turning on the machine with this setting activated and for every stitch selection that is not a straight stitch, a pop-up informs you that it is set to straight stitch. Deselect stitch width safety to go back to normal sewing. Note: Twin needle and stitch width safety cannot be used at the same time. Start/stop button safety Select this function to disable the start/stop button in sewing mode. This prevents the machine from starting to sew if the start/stop button is touched by mistake. When this function is selected, you must use the foot control to sew. Cut jump stitches Your machine features the automatic function Cut jump stitches. This function saves you time trimming after the embroidery is completed. When Cut jump stitches is selected your machine will trim the top jump stitch thread and pull the thread end to the underside of the fabric as you embroider. Note: Your machine will also cut the thread after you have changed to a new color. Hold the thread end when you start embroidering again, so that you can easily remove the thread end when cut. Designs marked with this symbol are programmed for Cut jump stitches. Jump stitch trim commands can be added to any design using the 5D™ Organizer Software, included with your machine. Automatic thread snips When selected, the automatic thread snips is activated. The threads are cut automatically and the presser foot raises at color changes or when an embroidery is Ànished. When deselected, no automatic thread snips will be performed. 3:10