Pfaff creative sensation Owner's Manual - Page 57

Select a stitch To select a stitch, touch the actual stitch in the stitch selection area (3). You can scroll through the list of 2b 2c 2d 2e stitches by touching the arrows at the bottom of the stitch selection area (4). The number of the actual subcategory is shown in the lower right corner (A). 1a 1c 2a 1b You can also select a stitch from the selection menu (24), see page 3:4. Sewing recommendations (1) Your machine automatically gives you recommendations for the selected stitch. a) Presser foot recommendation b) IDT™ system recommended c) Stabilizer recommended Machine settings (2) Some machine settings are indicated with a symbol when activated in the settings menu. a) Set for twin needle b) Set for stitch width safety c) Set for dynamic spring foot free-motion d) Set for spring foot free-motion e) Set for sensormatic free-motion 3 4 Raise and lower the presser foot Your machine features the automatic presser foot up and extra lift button and the presser foot down and pivot button. To lower the presser foot, place the fabric under the presser foot and press the presser foot down button (C) or step on the foot control. To raise the presser foot, press the presser foot up button (B) or press the thread snips button (D) to cut needle and bobbin thread and raise the foot. When the needle stops in BC D the down position, the presser foot raises to pivot height. You can also lower the presser foot and the needle with your foot control. If you tap your foot control once you will lower the presser foot. If you tap the foot control a second time the needle will be lowered into the fabric. Note: With Needle down selected, when you stop sewing and touch the presser foot up button the foot will raise but the needle stays in the fabric. Touch presser foot up again to raise the needle. A 4:3 Sewing mode