Pioneer BDP-150 User Guide - Page 46

08 46 En Problem Check Remedy • Picture is disturbed during playback. • Picture is dark. • This player supports Rovi analog copy protection technology. With some TVs (such as with built-in video deck), the picture will not be displayed properly when the copy protected DVD title is played. This is not a malfunction. • If the player and TV are connected via a DVD recorder/video deck, etc., the picture will not be displayed properly due to analog copy protection. Connect the player and TV directly. • Picture is stretched. • Picture is cropped. • Aspect ratio cannot be switched. Is the TV's aspect ratio properly set? Is TV Screen properly set? Read the operating instructions for the TV and set the TV's aspect ratio properly. Set TV Screen properly (page 33). When video signals with a resolution of 1080/50i, 1080/50p, 720/50p, 1080/24p, 1080/60i, 1080/60p or 720/60p are being output from the HDMI OUT terminal, they may be output with an aspect ratio of 16:9 even if TV Screen is set to 4:3 Pan&Scan (page 33). Picture is interrupted. The picture may be interrupted when the resolution of the recorded video signal switches. Press HDMI to select a setting other than Auto (page 35). The subtitles cannot be switched. The subtitles cannot be switched for discs recorded on a DVD or BD recorder. • No sound is output. • Sound is not output properly. Is the disc played back in slow motion? No sound is output during slow motion play and forward and reverse scanning. Is the disc played back in fast forward or fast reverse? Are the audio cables properly • Connect the cable properly according to the connected devices connected? (page 14). • Insert the cable firmly and all the way in. Is the audio cable damaged? If the cable is damaged, replace it with a new one. Is Audio Output properly Set Audio Output properly, according to the connected device set? (page 34). Are the connected Read the operating instructions for the connected components and components (AV receiver or check the volume, input, speaker settings, etc. amplifier, etc.) properly set? Are you trying to listen to the Audio signals are not output from the HDMI OUT terminal when video sound of the HDMI OUT signals are being output from the VIDEO output terminals. When terminal while watching the watching the picture of the VIDEO output terminals, connect an coaxial picture from the VIDEO digital audio cable or regular audio cables to listen to the sound output terminals? (page 17). Once connections are completed, use Setup Navigator to make the player's settings (page 20). Is HDMI Audio Out properly Set HDMI Audio Out to Re-encode or PCM. (page 35). set? Is a DVI device connected? The sound will not be output from the HDMI OUT terminal if a DVI device is connected. Connect the device to a DIGITAL OUT terminal or the AUDIO OUT terminals (page 17). For some BDs, audio signals are only output from DIGITAL OUT terminal or the HDMI OUT terminal. Multi-channel sound is not output. Is the audio output of the Read the operating instructions for the connected AV receiver or connected AV receiver or amplifier and check the audio output settings of the AV receiver or amplifier, etc., properly set? amplifier. Is multi-channel sound selected? Use the menu screen or AUDIO to switch the disc's sound to multichannel. Noise can be heard when Is the connected AV receiver If an AV receiver or amplifier that is not compatible with DTS Digital outputting DTS Digital Audio or amplifier compatible with Surround is connected to the DIGITAL OUT terminal, set Digital signals from the DIGITAL DTS Digital Surround? Output to PCM (page 34). OUT terminal. 192 kHz or 96 kHz digital audio signals cannot be output from the DIGITAL OUT terminal. It is not possible to output 192 kHz or 96 kHz digital audio signals from this player's DIGITAL OUT terminal. The signals are automatically converted to 48 kHz or less for output.