Pioneer DEH-P5900IB Owner's Manual - Page 35
SIRIUS Satellite Radio tuner, Available accessories, Basic Operations - manuals
UPC - 012562845814
View all Pioneer DEH-P5900IB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Available accessories Section 03 English SIRIUS Satellite Radio tuner Basic Operations You can use this unit to control a SIRIUS Satellite Radio tuner, which is sold separately. When the SIRIUS tuner is used together with this unit, some operations differ slightly from those described in the SIRIUS operation manual. This manual provides information on these points. For all other information on using the SIRIUS tuner, please refer to the SIRIUS operation manual. ! With this unit, you can operate one addi- tional function: SIRIUS channel direct selection. Refer to Selecting a SIRIUS channel directly on this page. 1 2 34 3 To perform tuning, push MULTI-CONTROL left or right. The channels move up or down step by step. Channels that cannot currently be selected are skipped, and the next channel is selected. # If you push and hold MULTI-CONTROL left or right, you can increase or decrease channel number continuously. # You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel category on the next page.) Note It may take a few seconds before you can hear anything while this unit acquires and processes the satellite signal when you change the source to SIRIUS tuner or select a channel. 5 1 SIRIUS band indicator 2 SIRIUS channel number indicator 3 SIRIUS preset number indicator 4 SIRIUS channel select setting indicator Shows what channel select setting has been selected. CH is displayed when Channel number is selected, and CAT is displayed when Category is selected. 5 SIRIUS channel name Shows the channel name of broadcast channel. 1 Press SOURCE to select SIRIUS. 2 Press BAND to select a SIRIUS band. Press BAND until the desired SIRIUS band is displayed, SR-1, SR-2 or SR-3. Selecting a SIRIUS channel directly When using the remote control, you can select the SIRIUS channel directly by entering the desired channel number. 1 Press DIRECT. Channel number input display appears. 2 Press 0 to 9 buttons to enter the desired channel number. # You can cancel the input number by pressing CLEAR. 3 Press DIRECT. The SIRIUS channel of entered number is selected. # After entering the number input mode, if you do not perform an operation within about eight seconds, the mode is automatically canceled. Introduction of advanced operations 1 Press MULTI-CONTROL to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT appear on the display. En 35