Pioneer DEH-P5900IB Owner's Manual - Page 56

Section 03 Available accessories TV tuner Basic Operations You can use this unit to control a TV tuner, which is sold separately. For details concerning operation, refer to the TV tuner's operation manual. This section provides information on TV operations with this unit which differs from that described in the TV tuner's operation manual. 1 2 3 1 Band indicator 2 Preset number indicator 3 Channel indicator 1 Press SOURCE to select the TV. 2 Press BAND to select a band. Press BAND until the desired band is displayed, TV-1 or TV-2. 3 To perform manual tuning, push MULTI-CONTROL left or right. 4 To perform seek tuning, push and hold MULTI-CONTROL left or right for about one second and release. The tuner will scan the channels until a broadcast strong enough for good reception is found. # You can cancel seek tuning by pushing MULTI-CONTROL left or right. # If you push and hold MULTI-CONTROL left or right, you can skip broadcasting channels. Seek tuning starts as soon as you release MULTI-CONTROL. Storing and recalling broadcast stations You can easily store up to 12 broadcast stations for later recall. ! Up to 24 stations, 12 for each of two TV bands, can be stored in memory. 1 When you find a station that you want to store in memory press LIST. 2 Use MULTI-CONTROL to store the selected station in memory. Turn to change the preset number; press and hold to store. The preset number you have selected will flash and then remain lit. The selected station has been stored in memory. 3 Use MULTI-CONTROL to select the desired station. Turn to change the station; press to select. # You can also change the station by pushing MULTI-CONTROL up or down. # If you do not operate the list within about 30 seconds, the display is automatically returned to the ordinary display. Using the remote control You can also store and recall stations assigned to preset tuning numbers P.CH1 to P.CH6 by using the remote control. % When you find a station that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the preset number stops flashing. The number you have pressed will flash in the preset number indicator and then remain lit. The selected station has been stored in memory. The next time you press the same preset tuning button the station is recalled from memory. # You can also recall stations assigned to preset tuning numbers by pushing MULTI-CONTROL up or down during the channel display. 56 En