Pioneer DEH-P940MP Owner's Manual - Page 45

ENGLISH ESPAÑOL DEUTSCH 2. Press the corresponding button to select the speaker unit (filter) to be adjusted. Button L LPF M HPF M LPF H HPF Speaker unit (filter) Low-range speaker LPF Middle-range speaker HPF Middle-range speaker LPF High-range speaker HPF 3. Press MUTE to mute the selected speaker unit (filter). "MUTE" blinks in the display. • Press MUTE again to cancel the muting. Adjusting network 1. Press AUDIO and then press NW to select the network adjustment mode. 2. Press the corresponding button to select the speaker unit (filter) to be adjusted. Button L LPF M HPF M LPF H HPF Speaker unit (filter) Low-range speaker LPF Middle-range speaker HPF Middle-range speaker LPF High-range speaker HPF 4. Press 5 or ∞ to adjust the level of the selected speaker unit (filter). Each press of 5 or ∞ increases or decreases the level of the selected speaker unit (filter). • "0dB" - "-24dB" is displayed as the level is increased or decreased. • "+6dB" - "-24dB" is displayed as the level is increased or decreased, only if you have selected "L LPF". 5. Press SLOPE to select the slope of the selected speaker unit (filter). L LPF: -12 = -18 = -6 (dB/oct.) M HPF: -12 = -18 = Pass (0) = -6 (dB/oct.) M LPF: -12 = Pass (0) = -6 (dB/oct.) H HPF: -12 = -6 (dB/oct.) 6. Press PHASE to switch the phase of the selected speaker unit (filter). Each press of PHASE switches the phase between normal and reverse . • You can adjust the parameters for other speaker units (filters) in the same way. 7. Press BAND to cancel the network adjustment mode. 3. Press 2 or 3 to select the cut-off frequency (crossover frequency) of the selected speaker unit (filter). L LPF: 31.5 Ô 40 Ô 50 Ô 63 Ô 80 Ô 100 Ô 125 Ô 160 Ô 200 (Hz) M HPF: 31.5 Ô 40 Ô 50 Ô 63 Ô 80 Ô 100 Ô 125 Ô 160 Ô 200 (Hz) M LPF: 1.6 Ô 2 Ô 2.5 Ô 3.15 Ô 4 Ô 5 Ô 6.3 Ô 8 Ô 10 Ô 12.5 Ô 16 (kHz) H HPF: 1.6 Ô 2 Ô 2.5 Ô 3.15 Ô 4 Ô 5 Ô 6.3 Ô 8 Ô 10 Ô 12.5 Ô 16 (kHz) FRANÇAIS ITALIANO NEDERLANDS 44