Pioneer DEH-P940MP Owner's Manual - Page 49
Recalling sound field programs, Switching the octaver setting, Adjusting BBE sound level
View all Pioneer DEH-P940MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
ENGLISH ESPAÑOL DEUTSCH Using loudness Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1. Press AUDIO and then press NEXT to display "LOUD". Press NEXT until "LOUD" appears. 2. Press LOUD to select the loudness mode. 3. Press LOUD to turn the loudness on. "LOUDNESS ON" appears in the display. • Press LOUD again to turn loudness off. Using sound field control, octaver and BBER sound SFC (sound field control) incorporates four programs reproducing the typical sound field of a studio, club, concert hall or dome. This function makes it possible to reproduce the realistic sound fields of the four programs in your car. Octaver makes the bass sound louder. With BBE, playback very close to the original sound can be obtained by correction with a combination of phase compensation and highrange boost for the delay of the high-frequency components and the amplitude deviation occurring during playback. This function makes it possible to reproduce the dynamic sound field as if you are listening to a live performance. Note: • Manufactured under license from BBE Sound, Inc. The mark BBE is a trademark of BBE Sound, Inc. Recalling sound field programs 1. Press AUDIO and then press SFC to select the sound field control mode. 2. Press the corresponding button to select the desired sound field program. Button STUDIO CLUB HALL DOME OCT BBE Effect Studio Club Concert hall Dome Octaver 1 and 2 BBE • Press the same button again to cancel the selected sound field program. Switching the octaver setting You can switch the octaver setting. "OCTAVER2" has a stronger effect than "OCTAVER1". 1. Press AUDIO and SFC and then press OCT to select octaver. 2. Press 5 or ∞ to switch the octaver setting. Each press of 5 or ∞ switches the octaver setting between 1 and 2. Adjusting BBE sound level With BBE sound processing technology, you can adjust the level of BBE. 1. Press AUDIO and SFC and then press BBE to select BBE. 2. Press 5 or ∞ to adjust the level of BBE. Each press of 5 or ∞ increases or decreases the level of BBE. • "+4" - "-4" is displayed as the level is increased or decreased. FRANÇAIS ITALIANO NEDERLANDS 48