Ricoh Aficio MP 2000 General Settings Guide - Page 29

Network Settings Menu File Transfer File Transfer File Transfer File Transfer File Transfer File Transfer File Transfer User Tool SMTP Server SMTP Authentication POP before SMTP Reception Protocol POP3/IMAP4 Settings Admin. E-mail Address E-mail Communication Port Setting Requirements Necessary As required As required 1 As required As required As required As required Note ❒ In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. ❒ When POP before SMTP is set to [On], also make setting for Reception Protocol and POP3/IMAP4 Settings. ❒ When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port. Reference p.47 "Interface Settings" p.53 "File Transfer" IEEE 802.11b (wireless LAN) This section lists the settings required for sending e-mail with IEEE 802.11b (wireless LAN). For details about how to specify the settings, see "Interface Setting" and "File Transfer". Menu User Tool Interface Settings/Network Machine IPv4 Address Interface Settings/Network IPv4 Gateway Address Interface Settings/Network DNS Configuration Interface Settings/Network DDNS Configuration Setting Requirements Necessary Necessary As required As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration As required Interface Settings/Network Effective Protocol Necessary Interface Settings/Network LAN Type Interface Settings/Network Permit SNMPv3 Communictn. Interface Settings/Network Permit SSL/TLS Comm. Necessary As required As required 21