Ricoh Aficio MP 2000 General Settings Guide - Page 50

System Settings Tray Paper Settings This section describes the user tools in the Tray Paper Settings menu under System Settings. Default settings are shown in bold type. 2 Important ❒ If the specified paper size differs from the actual size of the paper loaded in the paper tray, a misfeed might occur because the correct paper size was not detected. ❖ Paper Size: Tray 1-4 Select the size of the paper loaded in the paper tray 1. If the paper size set for the selector in the paper tray is different to the paper size for this setting, the paper size of the selector has priority. If you load paper of a size not indicated on the paper size selector in the paper tray, set the selector to "p". • Type 1 The paper sizes you can set for Tray 1 are as follows: A3L, A4K, A4L, A5K, B4 JISL, B5 JISK, B5 JISL, 11"×17"L, 81/2"×14"L, 81/2"×13"L, 81/2"×11"K, 81/2"×11"L, 81/4"×14"L, 81/4"×13"L, 8"×13"L, 71/4"×101/2"K, 71/4"×101/2"L, 51/2"×81/2"K, 8KL, 16KK, 16KL, Custom Size The default setting is A4L. You can specify a custom size as follows: 182.0 to 297.0 mm (7.17 to 11.69 inch) vertically, and 152.0 to 432.0 mm (5.99 to 17.00 inch) horizontally The paper sizes you can set for Tray 2, 3 are as follows: A3L, A4K, A4L, A5L, B4 JISL, B5 JISK, B5 JISL, 11"×17"L, 81/2"×14"L, 81/2"×13"L, 81/2"×11"K, 81/2"×11"L, 81/4"×14"L, 81/4"×13"L, 8"×13"L, 71/4"×101/2"K, 71/4"×101/2"L, 51/2"×81/2"L, 8KL, 16KK, 16KL, Custom Size The default setting is A5L. You can specify a custom size as follows: 182.0 to 297.0 mm (7.17 to 11.69 inch) vertically, and 152.0 to 432.0 mm (5.99 to 17.00 inch) horizontally 42