Ricoh Aficio MP 2000 General Settings Guide - Page 32

Connecting the Machine IEEE 802.11b (wireless LAN) This section lists the settings required for sending file with IEEE 802.11b (wire- less LAN). 1 For details about how to specify the settings, see "Interface Setting" and "File Transfer". Menu User Tool Setting Requirements Interface Settings/Network Machine IPv4 Address Necessary Interface Settings/Network IPv4 Gateway Address Necessary Interface Settings/Network DNS Configuration Interface Settings/Network DDNS Configuration Interface Settings/Network Domain Name Interface Settings/Network WINS Configuration Interface Settings/Network Effective Protocol Interface Settings/Network LAN Type Interface Settings/Network Permit SNMPv3 Communictn. Interface Settings/Network Permit SSL/TLS Comm. Interface Settings/Network Host Name Interface Settings/ IEEE 802.11b Communication Mode Interface Settings/ IEEE 802.11b SSID Setting Interface Settings/ IEEE 802.11b Channel Interface Settings/ IEEE 802.11b Security Type As required As required As required As required Necessary Necessary As required As required As required Necessary As required As required As required Interface Settings/ IEEE 802.11b File Transfer Communication Speed Default User Name/PW(Send) As required As required Note ❒ In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒ [IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.47 "Interface Settings" p.53 "File Transfer" 24