Ricoh Aficio MP 2000 General Settings Guide - Page 48
Screen Contrast Display Contrast
View all Ricoh Aficio MP 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
System Settings ❖ Panel Key Sound The beeper (key tone) sounds when a key is pressed. The default setting is On. ❖ Warm-up Beeper (copier) You can have the beeper sound when the machine becomes ready to copy af- ter leaving Energy Saver mode, or when the power is turned on. 2 The default setting is On. ❖ Copy Count Display The copy counter can be set to show the number of copies made (count up) or the number of copies yet to be made (count down). The default setting is Up. ❖ Function Priority Specify the mode to be displayed immediately after the operation switch is turned on, or when System Reset mode is turned on. The default setting is Copier. ❖ Print Priority Gives print priority to the mode displayed. The default setting is Display mode. When [Interleave] is selected, the current print job will be interrupted after a maximum of five sheets. When the optional Internal Tray 2 is installed on the machine, you can specify an output tray for document. ❖ Output:Copier (copier) Specify a tray to which documents are delivered. The default setting is Internal Tray 1. ❖ Output:Facsimile (facsimile) Specify a tray to which documents are delivered. The default setting is Internal Tray 1. ❖ Output:Printer (printer) Specify a tray to which documents are delivered. The default setting is Internal Tray 1. The output trays set on the printer driver have priority over the output tray specified above. ❖ Screen Contrast (Display Contrast) You can adjust the brightness of the display. The default setting is "4" (the halfway/medium setting). ❖ Key Repeat Set whether or not to repeat the functions of the {U}, {T}, {Lighter}, and {Darker} keys when those keys are pressed and held down. The default setting is Normal. 40